Electrolux ZKS5653 user manual Adjusting the dosage of rinse aid, Loading cutlery and dishes

Page 11

CAUTION!

Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Top up the rinse aid indica- tor (B) becomes clear

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades.

Open the lid.

Set the dosage level. (The

Close the lid and press un-

 

dose is factory set in po-

til it locks.

 

sition 4).

 

Loading cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

Before loading the dishes, you should:

Remove all left over food and debris.

Soften remnants of burnt food in pans

When loading the dishes and cutlery, please note:

Dishes and cutlery must not impede the rotation of the spray arms.

Load hollow items such as cups, glasses, pans, etc. with the opening downwards so

11

Image 11
Contents Dishwasher ZKS5653 Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationStarting the washing programme Cancel the washing programme in progressIndicator lights End of programme indicator lightType of load Salt refilling indicator lightWashing programmes Degree of soilSet the water softener When using tablets that integrate rinse aid and detergentFirst use Use of salt Setting the water softener manually see tableWater hardness Mmol/l Salt for the first time, fill Setting the water softener electronically see tableFilling with dishwasher salt Only before filling withFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketUnloading the dishwasher Use of detergentExternal cleaning Care and cleaningCleaning the filters Cleaning the spray armsEnvironmental concerns Something not working Fault code and malfunctionPossible cause and solution Programme does not start Wash results are not satisfactory Technical dataHints for test institutes Full load 12 standard place settingsConsumption values Cup racks position a InstallationWater inlet hose with safety valve Water connectionMust be removed . Fail Drain hosePlastic membrane a Levelling Electrical connectionFitting under a counter 156994870-00-20072007 Subject to change without notice