Electrolux ZKS5653 Starting the washing programme, Cancel the washing programme in progress

Page 5

Programme selector dial and On/Off switch

Start/cancel button

Programme selector indicator light

when in this position, the machine is switched off (corresponding light off),

when the marker on the dial corresponds with a programme, the machine is switched on and a pro- gramme is selected (programme selector indicator light on)

Starting the washing programme:

1.Select a washing programme.

2.Press the Start/Cancel button (corresponding light on).

IMPORTANT!

Once the programme has started, if you want to change the selection made you must cancel the wash- ing programme in progress.

Cancel the washing programme in progress:

1.Press and hold the Start/Cancel button until the corresponding light turns off.

2.Release the Start/Cancel button.

3.Turn the programme selector dial to the Off po- sition or select a new washing programme (check that there is detergent in the detergent dispenser.

Illuminates when the washing programme is selected

Indicator lights

Wash indicator light

Dry indicator light

End of programme indicator light

Illuminates when the washing and rinsing phases are running.

Illuminates when the drying phase is running.

Illuminates when the washing programme has ended. Switch off the dishwasher by returning the programme selector dial to the Off position. The On/Off indicator light turns off.

It also has added functions of visual signalling as:

the setting of the water softener,

intervention of an alarm due to the malfunction of the machine.

5

Image 5
Contents Dishwasher ZKS5653 Contents General safety Safety informationChild safety Correct useControl panel InstallationIndicator lights Cancel the washing programme in progressEnd of programme indicator light Starting the washing programmeWashing programmes Salt refilling indicator lightDegree of soil Type of loadSet the water softener When using tablets that integrate rinse aid and detergentFirst use Use of salt Setting the water softener manually see tableWater hardness Mmol/l Filling with dishwasher salt Setting the water softener electronically see tableOnly before filling with Salt for the first time, fillFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketUnloading the dishwasher Use of detergentCleaning the filters Care and cleaningCleaning the spray arms External cleaningEnvironmental concerns Something not working Fault code and malfunctionPossible cause and solution Programme does not start Wash results are not satisfactory Technical dataHints for test institutes Full load 12 standard place settingsConsumption values Water inlet hose with safety valve InstallationWater connection Cup racks position aMust be removed . Fail Drain hosePlastic membrane a Levelling Electrical connectionFitting under a counter 156994870-00-20072007 Subject to change without notice