Electrolux ZKS5653 user manual Care and cleaning, Cleaning the filters, Cleaning the spray arms

Page 15

Care and cleaning

Cleaning the filters

IMPORTANT!

NEVER use the dishwasher without filters. In- correct repositioning and fitting of the filters will produce poor washing results.

Clean filters A, B and C thoroughly under running water.

Put the flat filter A back in	Replace the filters and
the base of the washing	lock by turning the handle
compartment and ensure	clockwise to the stop.
that it fits perfectly under
the two guidesD.

Turn the handle about 1/4	Remove filter A from the
turn anticlockwise and re-	base of the washing com-
move filters B and C.	partment.

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never

15

Image 15

Contents Dishwasher ZKS5653 Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationStarting the washing programme Cancel the washing programme in progressIndicator lights End of programme indicator lightType of load Salt refilling indicator lightWashing programmes Degree of soilWhen using tablets that integrate rinse aid and detergent First useSet the water softener Setting the water softener manually see table Water hardness Mmol/lUse of salt Salt for the first time, fill Setting the water softener electronically see tableFilling with dishwasher salt Only before filling withFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketUnloading the dishwasher Use of detergentExternal cleaning Care and cleaningCleaning the filters Cleaning the spray armsEnvironmental concerns Fault code and malfunction Possible cause and solutionSomething not working Programme does not start Wash results are not satisfactory Technical dataFull load 12 standard place settings Consumption valuesHints for test institutes Cup racks position a InstallationWater inlet hose with safety valve Water connectionDrain hose Plastic membrane aMust be removed . Fail Electrical connection Fitting under a counterLevelling 156994870-00-20072007 Subject to change without notice