Electrolux ZKS5653 user manual Filling with dishwasher salt, Only before filling with

Page 9

Setting the water softener electronically (see table)

The water softener is factory set at position 5. The dishwasher must be switched off .

Press and hold the start/cancel button and turn the programme selector dial clockwise till the first pro- gramme.

Keep the button pressed until the programme selector indicator light and the start/cancel indicator light start flashing.

Release the button. The end of programme indicator light will flash. The number of flashes corresponds to current level set.

The end of programme indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds.

To change the level, press the start/cancel button. Each time the button is pressed the level increases. (Level 1 follows level 10).

The end of programme indicator light indicates the new setting.

To memorise the operation, turn the programme se- lector dial to position off.

Filling with dishwasher salt

CAUTION!

Use only special salt suitable for dishwashers.

Unscrew the cap.

Only before filling with

 

salt for the first time, fill

 

the salt container with wa-

 

ter.

Using the funnel provided, pour in the salt until the container is filled with salt.

9

Image 9
Contents Dishwasher ZKS5653 Contents General safety Safety informationChild safety Correct useControl panel InstallationIndicator lights Cancel the washing programme in progressEnd of programme indicator light Starting the washing programmeWashing programmes Salt refilling indicator lightDegree of soil Type of loadWhen using tablets that integrate rinse aid and detergent First useSet the water softener Setting the water softener manually see table Water hardness Mmol/lUse of salt Filling with dishwasher salt Setting the water softener electronically see tableOnly before filling with Salt for the first time, fillFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketUnloading the dishwasher Use of detergentCleaning the filters Care and cleaningCleaning the spray arms External cleaningEnvironmental concerns Fault code and malfunction Possible cause and solutionSomething not working Programme does not start Wash results are not satisfactory Technical dataFull load 12 standard place settings Consumption valuesHints for test institutes Water inlet hose with safety valve InstallationWater connection Cup racks position aDrain hose Plastic membrane aMust be removed . Fail Electrical connection Fitting under a counterLevelling 156994870-00-20072007 Subject to change without notice