10electrolux
Cook Functions
1 2 3 4
7 6 5
1Time
2Cook time
3End time
4Countdown
5Clock Functions button
6Selection button (Minus)
7Selection button (Plus)
Countdown 
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the functioning of the oven.
Cook time 
To set how long the oven is to be in use.
End time 
To set when the oven is to switch off again.
Time 
To set, change or check the time (See also section “Before Using for the First Time”).
How to use the clock functions
•After a clock function has been selected, the corresponding function flashes for about 5 seconds. During this period, the desired times can be set or modified using
the 
or button.
•When the desired time has been set, the function continues to flash for approx. 5 seconds. After that the function is then lit. The set time begins to run.
•With Countdown the oven must also be switched on in order to set the clock func- tion.
• By pressing 
and at the same time, the time set can be reset.
Checking the time set or remaining Press the Selection 
button repeated- ly, until the appropriate clock function flashes and the time set or remaining is displayed.
Using residual heat with the Cook
time and End time clock functions
When the Cook time 
and End time 
clock functions are used, the oven switches the heating elements off, when
90% of the time set or calculated has elapsed. The residual heat present is used to continue the cooking process until the time set has elapsed (3 to 20 mins.).
Countdown 
1.Press the Selection 
button repeatedly until Countdown 
flashes.
2.Set the desired Countdown using the
or button.
After about 5 seconds the display shows the time remaining. Countdown 
lights up. When 90% of the time set has elapsed, an audible signal sounds.
When the time has elapsed, an audible signal sounds for 1 minute. “00.00” and Countdown 
flash.
To stop the flashing and the audible sig- nal:
Press any button.
Cook time 
1.Select the oven function and tempera- ture.
2.Press the Selection 
button repeatedly
until Cook time 
flashes.
3.Set the desired cooking time using the
or |
| button (max. 09.59 hours). |
|
Cook time 
lights up.
When the time has elapsed, “00.00” and
Cook time 
flash.