Electrolux EOD67043 Accessories, Catalytic cavity cleaning selected models only, Side rails

22electrolux

2.Wipe out the oven after every use with a solution of washing-up liquid and then dry it.

Remove stubborn dirt with special oven cleaners.

Important! When using oven sprays, please follow the manufacturer's instructions exactly. Make sure that no visible remaining detergents are left after the cleaning with oven spray!

Accessories

•Clean and dry the oven accessories (shelf, tray, roasting pan, etc.) after each use. Soak the items to make cleaning easier.

Catalytic cavity cleaning (selected models only)

Warning! You must not wipe out the cavity side walls. It will damage the catalytic surface.

1.Remove all slide-in parts from the oven.

2.Wipe the floor of the oven clean with warm washing-up solution and dry.

3.Set the oven CATA function. You will find it in menu after other oven functions.

4.Oven will switch off after one hour.

5.Wipe away any remaining a damp from the floor with soft sponge.

Warning! Before you wipe away wait until the cavity is cool.

Warning!

Do not use oven spray or abrasive cleaning agents. Do not use soap or other cleansing agents. The catalytic coating may otherwise be damaged.

After long periods of use, the catalytic coating may become slightly discol- oured. This has no effect on the catalytic properties.

Side rails

The side rails on the right and left-hand side of the oven interior can be removed for the purpose of cleaning the side walls.

Removing the side rails

First pull the rails away from the oven wall at the front (1) and then unhook them at the back (2).

Replace the side rails

Important! Important The rounded ends of the guide bars must point to the front.

To install, first insert the rails in the holes at the back (1) and then lower into position at the front and press into place (2).

1

2