Electrolux CSIG 511 Pressure Testing, Checking the Grill, Checking the Hotplate

Page 48

If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or

by the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket.

Fig.4a

Plug in the appliance.

6. PRESSURE TESTING

1 The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Csig For your safety IntroductionContents Lighting the appliance HotplateLeave the grill door open when you are using the grill Grill/second ovenGrill Second ovenMain oven To turn off any burnerOven light Prior to using the grill High settingGrill Heat controlCooking positions GeneralPreheating Positioning food onthe gridGrill pan and handle Grill pan is supplied with a removable handleHotplate Burner sizesFor your safety Helpful hints Ovens Heat zonesOven shelves Baking trays and dishes Most second oven cooking should beRoasting CondensationOven cooking chart Main oven Mins. per ½kg 1lb and 25 mins Mins. per ½kg 1lb and 15 mins¼ 2¾ hours 205 mm ½ 2¾ hours30 40 mins Rolls and buns 10 20 minsOven cooking chart Second oven Base MediumLamb Shelf on Medium Base Well DoneIndividual 20 30 mins Cakes Christmas Cake Shelf ½ 4½ hours ½ hoursPastries Plate tart shortcrust 25 35 mins Fruit pie shortcrust 25 35 minsBaking tray Baked custard 50 60 minsElectronic timer Turn the selector knob to Manual then turn to Time SettingTo set the time of day To use the CountdownSetting the controls for automatic use Automatic controlHow long will Turn the selector knob to Food take To cook?Cooked by? Will go outHints and tips for automatic cooking Slow cooking Food preparation slow cookingPlease note There is no slow cook on the second oven Do not cook casseroles over 2.7kg 6lb Cover food with a tight fitting lid or tin foilThaw thoroughly before cooking Care and cleaning For your safety Cleaning the brass plated handle Where applicableWhen replacing hotplate burner parts Crown to body Do not try to force the crown on to the bodyGrill and top oven Main oven Main oven cleaning cycle Cleaning between the outer and inner door glass To remove the outer glassCleaning The Door Glass Installing the applianceLocation For further details seeAppliance dimensions PositioningCurtains behind the appliance Height to hotplate 900mm 920mmGeneral information For your safety Connecting to the electricity supplyMoving your appliance Replacing the oven light bulb What is wrong and why? CheckProbably a fault Service and spare parts 7 0 5 9 2 9 9 2Customer Care Department Installation Instructions Dimensions ConnectionsGrill HotplateImportant Safety Requirements Main OvenSecond Oven GeneralLocation of Appliance Parts Required Levelling the ApplianceFitting the Stability Bracket Connecting to GAS Connection to the Electricity SupplyPressure Testing Checking the GrillChecking the Hotplate Checking LID SHUT-OFF DeviceChecking the Main Oven Controls Checking the Main OvenAutomatic Operation CSIG511 Checking the Second OvenChecking the Main Oven Light General NoteContents Check List 55 77 High Street Telephone 0870 5 Part Number311590704

CSIG 511 specifications

The Electrolux CSIG 511 is a modern, sleek steam generator iron designed to make the task of ironing more efficient and comfortable. This appliance combines powerful steam technology with user-friendly features, ensuring that every crease is smoothed out with ease.

One of the standout features of the CSIG 511 is its impressive steam output. With a continuous steam production of up to 130 g/min, it delivers a strong burst of steam that penetrates fabrics deep, making it particularly effective for tackling stubborn wrinkles on various materials, including cotton and linen. This high steam output is complemented by a steam boost function, which can generate an even more concentrated burst of steam at 480 g, ideal for vertical steaming of hanging garments or delicate fabrics.

The CSIG 511 also boasts a large water tank capacity of 1.5 liters, allowing for extended ironing sessions without the need for frequent refills. The tank is detachable, making it convenient to fill up under the tap. Additionally, the appliance features a built-in anti-calc system that helps combat limescale buildup, ensuring longevity and performance over time.

User comfort is a priority in the design of the Electrolux CSIG 511. It features an ergonomic handle that is comfortable to grip for prolonged use, and the iron itself is lightweight, reducing fatigue during lengthy ironing tasks. The 2.5-meter power cord provides flexibility and ease of movement, allowing users to freely navigate around the ironing area.

Another noteworthy characteristic is the advanced soleplate technology of the CSIG 511. The soleplate is designed with a durable non-stick coating that glides smoothly over fabrics, preventing snagging while enhancing heat distribution for optimal results. The pointed tip of the soleplate aids in reaching difficult areas such as collars and seams with precision.

Safety features have also been thoughtfully incorporated into the CSIG 511. It includes an automatic shut-off function that activates when the appliance is left unattended for a designated period, reducing fire risks and providing peace of mind.

In summary, the Electrolux CSIG 511 steam generator iron is a powerful and efficient appliance that combines cutting-edge technology with user-friendly design. With high steam output, a large water tank, ergonomic features, and safety mechanisms, it transforms ironing into a quick and hassle-free experience for users.
Top Page Image Contents