Emerson 3350, 3700 installation instructions European installations, Installation kit

Page 3

European installations

This Micro Motion product complies with all applicable European directives when properly installed in accordance with the instructions in this quick reference guide. Refer to the EC declaration of conformity for directives that apply to this product.

The EC declaration of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on the web at www.micromotion.com/atex or through your local Micro Motion support center.

Installation kit

The Model 3350/3700 installation kit includes the parts shown in Figure 1.

Figure 1. Field-mount installation kit

Mounting bracket

4 x Lock washer

Transmitter can be oriented on bracket. See Step 3.

4 x Flat washer

4 x M8x16 Bolt assemblies

2

Image 3
Contents Model 3700 Transmitter MVD or Model 3350 Peripheral Before YOU Begin Installation kit European installationsVisibility of tags DimensionsChoosing a location Environmental requirementsDimensions face view Cable lengths Dimensions conduit openings viewMaximum cable lengths Wire remote transmitterOrienting the Model 3350/3700 optional Preparing conduit openings for Atex ZoneMounting to a flat surface Mounting the applications platformMounting the core processor Connecting input and output wiringInput/output wiring terminals Wiring terminalsConnecting the Model 3700 to the sensor Wiring terminal labelsWiring instructions for 4-wire remote installations Installation optionsWire cable to Model 3700 standard core processor Page Gland nut Shielded heat shrink completely covers exposed drain wires Reinstall and tighten the core processor lid Wire cable to core processor Connecting power supply wiring Page Page Page 20001008