Electrolux SG558 user manual Care and cleaning

Page 26

Care and cleaning

WARNING!

Before cleaning always allow the appliance to cool down before switching off at the electricity supply.

Cleaning materials

•Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.

•Cleaners that contain bleach should not be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided.

Cleaning the outside of the appliance

•Do not use abrasive cleaning materials e.g. abrasive cream cleaners, wire wool pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel, doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking, finish with a soft cloth.

•Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.

WARNING!

Do not attempt to remove any of the control knobs from the appliance as this may cause damage and is a safety hazard.

26

Cleaning the control knobs and handles

It is strongly recommended that only hot soapy water be used for cleaning the control knobs and handles. ANY OTHER CLEANING

MATERIALS MAY DULL THE SURFACE FINISH.

Cleaning the hob

•Clean the hob using a mild abrasive.

•Take care not to damage the spark electrodes. If the spark electrodes are damaged the burners will not light. You can remove the pan supports, burner caps and burner crowns to clean them. Again take care not to damage the spark electrodes.

•Clean the burner crowns and pan supports by soaking them in very hot soapy water.

•Aluminium based saucepans can leave shiny metal marks on the pan supports. You can remove any stubborn stains by scouring with a soap impregnated steel wool pad. If you look after the burner crowns and pan supports in this way they will stay reasonably clean. However the surface will dull with time. After cleaning the appliance parts, dry them thoroughly before you put them back.

When replacing hob burner parts

1.Crown to body. (Do not try to force the crown on to the body). Make sure that the hole in the crown is over the electrode. Check that the location pegs sit in the slots in the body. When the crown is in this position let it fall freely on to the body. Check that the crown can be moved slightly from side to side.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model SG558 Contents Child safety Important safety instructionsInstallation During useCleaning and maintenance Product description Controls and their functions Main oven control Grill Top oven control Hob ControlsCondensation and steam Before using the applianceRating plate CookwareAll1grillmodelspangrid Grill and oven furnitureSet the time of day When the electricity Press the decreaseElectronic minute minder Increase buttons ON, the display will Together FlashMinute minder Hob To cancel the minute minderHighest setting To light the hob burnersHints and tips To turn off any burnerThings to note Do not overfill pans or they will boil overTo turn off the grill Using the grillGrill Grill pan and handle LPG models only Grill pan and handle NG models onlyGrilling chart Food should be turned over during cooking as requiredPreheating Using the top ovenTop oven To turn the top oven offTo fit the top oven shelf Heat zones Using the main ovenMain oven To fit the main oven shelvesTo turn the main oven off Oven light will illuminateOven cooking chart Approximate Cook time mOven cooking chart Roasting chart Cooking time Push in the control knob and turn it to gas mark Using slow cook Slow cook To turn the slow cook off Thaw thoroughly before cooking Food preparation slow cookingGeneral points Care and cleaning Cleaning the doors Cleaning the grill and oven furnitureCleaning the grill Outer door glass is removable for cleaningTo clean the inner glass door panels To remove the outer door glassReplacing an oven light bulb Type of bulb required is a 300C 25 watt small Edison ScrewTroubleshooting ProblemHob burners will not light Flame colour is orange/yellow Gas connection Electrical connection Height Width Depth WeightTechnical details 600mm to front of door panel 67Kg 2mm minimum clearanceHeat input 0kW 9kW 8kW 71.8g/h 136.5g/h 194.0g/h Heat input 0kW 9kW 3412 Btu/h 6483 Btu/h 9895 Btu/h070 096 119 050 071 086Installation instructions Provision for ventilationLocation of appliance For your safetyMoving your appliance If a moulded plug is fitted By the earth symbol or coloured green or green and yellowLeveling the appliance Level appliance Connecting to gas supplyFitting the stability bracket Shaded area indicatedChecking the hotplate Pressure testingChecking the grill Checking the second ovenTurn off the control and check that the oven flames go out EnvironmentGeneral note Purchase date Service and spare partsCustomer care department Guarantee conditions ExclusionsPage Page 311785400 05/2006 Subject to change without notice
Top Page Image Contents