![](/images/new-backgrounds/1060380/6038043x1.webp)
Self-Clean Cycle
To start the Self-Clean cycle:
1.Close the door completely.
2.Turn the oven selector knob clockwise to the “SELF CLEAN”mode.
3.Turn the temperature control knob past the clean settingntilu the knob stops. At this time, the clean indicatorlight will come on. Within 30 seconds the automatic dor latch engages and the oven indicator light comes on. The oven indicator light will remain on until the oven reaches the
4.The door lock indicator light will remain on untilthe
Note: A fan noise will be heard during
5.When thecycle is completed, turn both the oven selector and temperature control knob tothe “OFF”position. When the oven has completely cooled, open door and remove any ash from the oven surfaces with a damp cloth.
To stop the Self-Clean cycle:
To cancel or interruptthe
Product Care
Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD Disconnect the electric power at the main fuse or circuit breaker before replacing bulb.
CAUTION
To avoid risk of personal injury, DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
| glass light |
1. Unsnap glass light cover | cover |
| |
using a screwdriver in the |
|
access groove. |
|
| access |
| groove |
2. Firmly grasp light bulb and |
|
pull out. |
|
| light |
| bulb |
3. Replace with halogen bulb using volt and wattage requirements listed on glass cover.
4. Replace the light cover by snapping glass cover onto metal box.
5.Reconnect power at the main fuse or circuit breaker.
Product Care
42 | 43 |