Breville BES980 brochure Care & Cleaning, Cleaning conical burrs

CARE & CLEANING

CLEANING CYCLE

• CLEAN ME! will be displayed on

the LCD to indicate when a cleaning

cycle is required (approx. 200 shots).

The cleaning cycle cleans the shower

•The LCD will display a countdown timer showing remaining time for the cleaning cycle in seconds.

CARE & CLEANING

Cleaning conical burrs

Regular cleaning helps the burrs achieve consistent grinding results which is especially important when grinding for espresso.

screen and back-flushes the group head.

• When the cleaning cycle has finished,

1

2

3

4

5

remove the portafilter and ensure the

tablet has completely dissolved. If the

Unlock hopper Remove beans Replace & lock Run grinder until empty

hopper

Unlock & remove hopper

• Insert the supplied grey silicone

cleaning disc, followed by 1 cleaning

tablet into the filter basket.

• Lock the portafilter into the group head.

• Ensure the water tank is filled with cold

water and the drip tray is empty.

tablet has not dissolved, repeat these

steps, without inserting a new tablet.

• Rinse the filter basket and portafilter

thoroughly before use.

• Extract an espresso to "season" the

machine and purge the system of

any remaining cleaner.

6 7

8

9

10

11

• Press the MENU button and rotate

SELECT dial until 'CLEAN CYCLE' and

'PUSH' are displayed on the LCD.

INSTALLING THE WATER FILTER

Remove upper	Clean upper
burr	burr with
	burr brush

Clean lower burr with burr brush

Remove tamping Clean grind		Replace tamping
fan with tamp	outlet with grind fan by hand
removal magnet	outlet brush

MENU

EXIT

SELECT

• Discard the used water filter. Soak a new

filter in a cup of water for 5 minutes,

then rinse under cold running water.

• Wash the filter holder with cold water,

taking specific care to rinse the stainless

steel mesh.

• Insert the filter into the two parts of the

filter holder.

• To install the assembled filter holder

into the water tank, align the base of the

filter holder with the adapter inside the

water tank. Push down to lock into place.

12

Push upper burr firmly into position

13 14

Lock upper burr Insert hopper

15

Lock hopper

TEMP TEXTURE

•Press the SELECT dial to start the cleaning cycle.

• Fill the water tank with cold water before

sliding back into position at the back of

the machine and locking into place.

NOTE

Burr brush

Tamp removal

magnet

Visit www.breville.com.au or call Breville Customer Service Centre to purchase water filters.

Grind outlet brush

34 35