Breville BES840 brochure No steam is generated, No hot water, Milk is not creamy after, Texturing

TROUBLESHOOTING				NOTES
Problem	POSSIBLE CAUSES		WHAT TO DO
No steam is generated	• Machine is not turned		Ensure the machine is
		On	plugged in, switched On at
			the power outlet and
			the POWER button is
			pressed On.
	• Water tank is empty		Refer to ‘Filling The Water
			Tank’, page 12.
	• Steam Dial is not in		Turn the STEAM/HOT
		STEAM/HOT WATER	WATER dial to the
		dial position	STEAM position.
	• Steam Wand is blocked		Use the pin on the cleaning
			tool to clear the opening. If
			the steam wand continues
			to be blocked remove the
			tip of the steam wand using
			the spanner in the middle
			of the cleaning tool. Refer
			to ‘Care and Cleaning’,
			page 25.
No hot water	•	Empty tank	Fill tank
Milk is not creamy after	•	Not enough steam	Steam wand may be
texturing			blocked. Refer to ‘Care and
			Cleaning’, page 25.
			Use cold fresh milk. Refer
			to ‘Texturing Milk’, page 15.
Machine is not working			The safety thermal-cut may
			have activated due to the
			pump overheating.
			Turn the machine off and
			allow to cool for about
			30-60 minutes.

32 33