Emerson MS3103 owner manual Setting the Clock

SETTING THE CLOCK

Use the buttons on the unit’s front panel to carry out this procedure.

1.) Press POWER/STANDBY button to switch the unit on.

2.) Press the AUX button.

(Note the time setting flashes in the center of the display.)

3.) Press the TIME-SET/MEMORYbutton so that

the hour setting flashes, then press or button to set the correct hour (making sure the flashing AM or PM is correct).

4.) Press TIME-SET/MEMORYso that the minute

setting flashes, then press or button to set the correct minute.

5.) Press TIME-SET/MEMORYto finish clock setting.

Once the time has stopped flashing, the clock is set.

NOTE: If ever you find the whole time display is flashing, this means that the clock needs to be re-set (possibly due to the unit having been disconnected from the AC outlet, or a power interruption).

13

MS3103_ib012803.p65 13

28/1/2003, 11:36