5.) Press the OPEN/CLOSE button to close the CD door. Do not close the door by hand. Each of the discs will
spin momentarily and then the | DISC 1 | CD |
|
| |
system will read the first disc and |
| TOTAL |
|
|
the display will show the total tracks and playing time of the first disc.
6.) Press the PLAY/PAUSE button on the front panel or remote control to begin playback on the first disc. If you loaded more than one disc in the player you may also press the CD1, CD2, or CD3 buttons on the front panel or remote control to begin playback on any of the discs in the player. Playback will begin on Track 1 and continue until the end of the disc. The display will show the elapsed playing time of each track as it plays. If there is more than one disc in the player, playback will continue until all tracks on all discs have been played, then the player will stop and the display will show the total tracks and playing time on the last disc.
7.) To stop playback at any time press the STOP button on the front panel or remote control. Playback stops and the display will show the total tracks and playing time on the disc that was playing.
Removing Discs From The Player
When you are finished listening press the STOP < button to stop playback if necessary and then press the OPEN/CLOSE button to open the CD door. Place your finger in the
22
MS3103_ib012803.p65 | 22 |
28/1/2003, 11:36