Programmed Playback
This system has a 60 track programmable memory that allows you to program up 60 tracks on 3 discs for playback in any desired order.
NOTE: YOU CANNOT PROGRAM THE PLAYER WHILE A DISC IS PLAYING. YOU MUST PRESS THE STOP 
BUTTON TO STOP PLAYBACK BEFORE BEGINNING THE PROGRAM STEPS BELOW.
1.) Load up to 3 discs in the player as usual. Close the CD door and wait until the display shows the total tracks and playing time of the first disc.
DISC 1
TOTAL
DISC 1
CD
CD
2.) Press the
track number “00” and “P – 01”
(program memory number 1), and the MEMORY indicator will be
3.) Select the disc number which contains the first track to be programmed by pressing the CD/ DISC SKIP button until the desired DISC number appears in
4.) Press the Skip 
or 
buttons to select the first track to be programmed.
MEMORY 
flashing.
CD
MEMORY 
CD
MEMORY 
Example: Track 7
5.) When the desired disc and track
numbers appear in the display | CD |
| |
press the | DISC 3 |
MEMORY | |
button again to enter that disc |
|
and track in Program Memory number 1. The track number display returns to “00” and the Program Memory number display advances to “P – 02”.
25
MS3103_ib012803.p65 | 25 |
28/1/2003, 11:36