Emerson MS3103 owner manual Template Instructions

Page 33

TEMPLATE INSTRUCTIONS

1.) Select the desired location for wall mounting after carefully reviewing the "General Precautions and Recommendations" of the wall mounting instructions.

2.) Tape the template to the wall, or other surface, in the desired location. Align the top edge of the template with the pencil mark you made on the wall. Be sure to allow at least 3" clearance above the main unit, for the CD door to open fully.

3.) Make sure that the template is level.

4.) Use an awl, ice pick, a nail or similar pointed tool, and push through the template to make a small starter hole in the wall surface as indicated by the "Drill Hole Here" marks. Then remove the template from the wall.

5.) Before You Drill: Make sure that there are no water plpes, gas pipes, electrical wires on other obstructions or hazards behind the wall in your chosen mounting location. If you are not sure about this. and don't know how to check, perhaps you should consider having the system mounted by someone with the necessary experience.

6.) Make sure that you are using the correct type of anchors for your wall. If the wall material is Sheetrock® (sometimes called wall-board, gypsum-board, or plaster-board) you can use plastic ‘hollow-wall anchors’. If your wall is solid plaster, concrete, brick, or similar solid material, use the appropriate type of ‘solid-wall anchors’. If your wall is solid wood, you may be able to use round- head wood screws without anchors.

IMPORTANT: If you have no experience installing wall anchors you should have this system mounted by someone who does have the proper experience.

Whichever type anchors you use, make sure that the diameter of the screw heads is at least 1/4”.

Follow the instructions supplied with the wall anchors to determine the proper size drill bit to use in your electric drill. After installing the proper size bit, drill holes in the wall surface at the 4 locations where you made the starter holes in Step 4.

32

MS3103_ib012803.p65

32

28/1/2003, 11:36

Image 33
Contents MS3103 Important Safety Instructions Before WE Begin Class 1 Laser Product Important NotesPreparation for USE Unpacking and SET-UPPositioning the Main Unit and Speakers MS3103ib012803.p65 28/1/2003 Speaker Connections AUX Connecting to External Audio SourcesAC Outlet AC Plug Power SourceBattery Precautions Installing Remote Control BatteriesVolume Location of Controls and IndicatorsVOL UP Remote ControlTurning the System ‘ON’ Operating InstructionsSetting the Clock Headphones VolumeGeneral Controls Selecting The Sound SourceGraphic Equalizer Standby Power OffAutomatic Tuning Tuning-in a New Radio StationManual Tuning Listening to the RadioPresetting Stations In The Tuner Memory Changing Preset Stations Recalling Preset StationsTime MODE/REMAIN Button FM Mode Selector MONO/STEREOPlaying Compact Discs Normal Playback System will read the first disc Removing Discs From The PlayerImmediate CD Playback Direct Track Selection Remote Control OnlyPause Control Skip/Search ControlsIntro Scan Playback Remote Control Only Repeat PlaybackRandom Playback Press the TIME-SET/ Memory Programmed PlaybackClearing The Program Memory Program Repeat Function Editing The ProgramTrack and Time Displays Timer Operation Sleep Timer Cancelling Timer OperationWall Mounting Instructions General Precautions and RecommendationsPencil Mark AT Center Template Instructions MS3103ib012803.p65 28/1/2003 MS3103ib012803.p65 28/1/2003 Care and Maintenance Compact Disc CareCare of the Cabinet Limited Warranty Emerson Radio Corp