6.) Repeat Steps 3, 4, and 5, selecting different disc and track numbers each time as desired until you have entered up to 60 tracks in the program memory. CAUTION: If the STOP 
button is pressed before you finish programming the player exits the program mode and all previously stored information is erased.
7.) When you have entered all the desired tracks in the program memory press the PLAY/PAUSE 
button to begin programmed playback. The tracks that you programmed will play in the desired order.
CD
TRACK
MEMORY
CD
After the last programmed track
has played the player stops but 
MEMORY
the program remains in the
memory. Press the PLAY/PAUSE 
to play the programmed sequence again. The programmed sequence remains in the memory even if you switch to the TUNER or AUX function, or shut the system ‘Off’.
Clearing The Program Memory
If a disc is playing press the STOP 
button once to stop playback and then press the STOP 
button again to clear the program memory. The program memory will also be cleared if the CD door is opened.
26
MS3103_ib012803.p65 | 26 |
28/1/2003, 11:36