TIMER OPERATION
The timer facility allows you to set the unit to switch itself on and off automatically, for example, to wake you up each morning.
While setting up the timer, make sure you carry out each step within 5 seconds, otherwise the operation will time out and you will have to start again.
NOTE: During timer setup, always check the AM / PM indicator (to the left of the time) to ensure you make the correct settings.
1.) Select the radio station or CD you wish to play when the unit switches on. (For CD this can be a programmed selection of tracks if desired.)
2.) Press TIME MODE/REMAIN button repeatedly until TIMER ON indicator flashes at the right of the display, then press
The
3.) Immediately press or buttons to set the hour (making sure the flashing AM or PM is correct), then press
The minute setting will flash.
4.) Immediately press or buttons to set the minute, then press
5.) Press TIME MODE/REMAIN button repeatedly until TIMER OFF indicator flashes at the right of the display, then press
The
6.) Immediately press or buttons to set the hour, then press
The minute setting will flash.
7.) Immediately press or buttons to set the minute, then press
The
28
MS3103_ib012803.p65 | 28 |
28/1/2003, 11:36