Breville BJB840 manual Blender Troubleshooting, Problem Easy Solution Blender will not work or

BLENDER TROUBLESHOOTING

Problem	Easy Solution
Blender will not work or	• Check that the power plug is securely inserted into
suddenly switches off	wall outlet.
during juicing	• Insert the power plug into an independent outlet.
	• Insert the power plug into a different outlet.
	• Reset the circuit breaker if necessary.
	• Ensure the Safety Locking Arm is in the upright
	position and is securely locked into the two grooves
	on either side of the Blender Jug base (see page 32).
	• The Overload Protection may have automatically
	de-activated the motor. Unplug the power cord from
	the wall outlet and press the OVERLOAD RESET
	button found on the underside of the Motor Base.
	This will reset the Overload Protection, enabling you
	to reconnect the power cord to the wall outlet and
	recommence normal use (see page 36).
	• The Overheat Protection may have automatically
	de-activated the motor. Unplug the power cord from
	the wall outlet and allow the appliance to cool for at
	least 15 minutes. Insufficient cooling time may result
	in the motor de-activating again. After sufficient
	cooling time, reconnect the power cord to the wall
	outlet and recommence normal use (see page 36).
	• The Electronic Protection may have automatically
	de-activated the motor. Unplug the power cord
	from the wall outlet. Either too much food is being
	blended at one time or the pieces are not small
	enough. Try removing a portion of the mixture,
	cutting food into smaller pieces of even size and/
	or processing a smaller amount per batch. For best
	results the food should be chopped into pieces no
	larger than 2cm (¾ inch). Then reconnect the power
	cord to the wall outlet and recommence normal use
	(see page 36).

44