ASSEMBLING THE BLENDER
Assembling the BLENDER
Before using the Blender for the first time, remove and safely discard any packaging material and promotional labels. Ensure the power cord is unplugged from the wall outlet.
Wipe the Motor Base with a damp cloth. Dry thoroughly.
Wash the Lid, Inner Lid, Blender Jug, Removable Silicone Gasket and Removable Blade Assembly (see Disassembling the Blender, page 37) in warm, soapy water with a soft cloth. Rinse and dry thoroughly.
Alternatively:
•Fill the Blender Jug halfway with warm (not hot) water and add
OR
•Place these parts in the dishwasher on a normal cycle. The Removable Silicone Gasket and Removable Blade Assembly should be removed from the Blender Jug and placed on the top shelf of the dishwasher with the Lid and Inner Lid. The Blender Jug should be turned upside down (with the jug spout facing downwards) to prevent the dishwasher’s heating element from damaging the Blender Jug base.
1.Place the Motor Base on a flat dry surface such as a bench top. Ensure the power cord is unplugged from the wall outlet.
2.With the raised rim of the Removable Silicone Gasket facing downwards, place the Gasket onto the Blade Assembly and push down until it clicks into place.
WARNING
Be careful when handling the blending blades as they are sharp. Mishandling of the blades may cause injury.
Place raised rim downwards into Blade Assembly.
31