KitchenAid W10329364A installation instructions Temperature and Moisture, Ice and Water

Page 14

The doors will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back into the correct position.

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

Temperature is too cold in refrigerator

■Refrigerator air vent blocked? If the air vent located in the top, left, rear corner of the refrigerator compartment is blocked by items placed directly in front of it, the refrigerator will get too cold. Move items away from the air vent.

■Ice storage bin in correct position? See “Ice Maker and Ice Storage Bin.”

■Controls set correctly for the surrounding conditions? Adjust the controls a setting warmer. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure ice maker is on. See “Ice Maker and Ice Storage Bin.”

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Remove the PackagingRecommended Grounding Method Location RequirementsElectrical Requirements Water Pressure Water Supply RequirementsConnect the Water Supply Reverse Osmosis Water SupplyConnect to Refrigerator Complete the InstallationRefrigerator Doors and Drawer Remove and Replace HandlesRemove Drawer Front Replace Doors and HingesRemove and Replace Freezer Drawer Replace Drawer FrontDoor Removal & Replacement Refrigerator USE Adjust the DoorsUsing the Controls Opening and Closing DoorsTo Adjust Set Point Temperatures Temperature ControlsAdjusting Controls Options Door AlarmCrisper Humidity Control Ice Maker and Ice Storage BinWater and Ice Dispenser Water Filtration System CleaningRefrigerator Care Refrigerator Operation TroubleshootingChanging the Light Bulb Temperature and Moisture Ice and WaterWater is leaking from the dispenser system Water Filter CertificationsWater and ice dispenser will not operate properly Water from the dispenser is warmPerformance Data Sheets Application Guidelines/Water Supply ParametersModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters Items Excluded from Warranty Kitchenaid Refrigerator WarrantyLimited Warranty This limited warranty does not coverPage Instrucciones Para EL Usuario DEL Refrigerador Seguridad DEL RefrigeradorRequisitos de ubicación Instrucciones DE InstalaciónDesempaque el refrigerador Método de conexión a tierra recomendado Requisitos eléctricosRequisitos del suministro de agua Presión del aguaConexión al refrigerador Conecte el suministro de aguaConexión a la línea de agua Para quitar y volver a colocar las manijas Puertas y cajón del refrigeradorComplete la instalación Cómo quitar las puertas y las bisagrasPara quitar el frente del cajón Cómo volver a poner las puertas y las bisagras en su lugarCómo quitar y volver a colocar el cajón del congelador Para volver a colocar el frente del cajónCómo quitar la puerta y cambiarla Cómo abrir y cerrar las puertas USO DE SU RefrigeradorAjuste las puertas Uso de los controlesPara encender/apagar el enfriamiento Opciones Alarma de la puertaControles de temperatura Cómo ajustar los controlesControl de humedad del cajón Para verduras Fábrica de hielo y depósito de hielo Despachador de agua y hieloSistema de filtración de agua Cómo cambiar el foco Cuidado DE SU RefrigeradorLimpieza Para limpiar su refrigeradorSolución DE Problemas Funcionamiento del refrigeradorLa temperatura está demasiado baja en el refrigerador Temperatura y humedadLa temperatura está demasiado caliente Hay acumulación de humedad en el interiorHay fugas de agua en el sistema del despachador El hielo tiene mal sabor, mal olor o un color grisáceoEl despachador de agua y hielo no funciona debidamente El agua del despachador está tibiaHoja DE Datos DEL Rendimiento Pautas de aplicación/Parámetros para el suministro de aguaModelo UKF8001AXX-200 Capacidad 200 galones 757 litros Garantía DEL Refrigerador DE Kitchenaid Garantía LimitadaKitchenAid Brand Home Appliances Instructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Spécifications de l’alimentation en eau Méthode recommandée de mise à la terreSpécifications électriques Pression de leauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Portes et tiroir du réfrigérateur Achever l’installationEnlèvement et réinstallation des poignées Enlèvement de la porte et des charnièresRéinstallation de la façade du tiroir Réinstallation des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Dépose de la façade du tiroirEnlèvement et réinstallation de la porte Ajustement des portes Utilisation des commandesUtilisation DU Réfrigérateur Ouverture et fermeture des portesOptions Door Alarm avertisseur de la porte Commandes de températureAjustement des commandes Mode vacancesRéglage de lhumidité dans le bac à légumes Machine à glaçons et bac d’entreposage Distributeur d’eau et de glaçonsSystème de filtration de leau Nettoyage Remplacement de l’ampoule d’éclairageEntretien DU Réfrigérateur Nettoyage de votre réfrigérateurDépannage Fonctionnement du réfrigérateurLa température est trop basse dans le réfrigérateur Température et humiditéLa température est trop élevée Il y a une accumulation dhumidité à lintérieurLeau du distributeur est tiède Goût, odeur ou couleur grise des glaçons’eau coule du système de distribution Feuilles DE Données SUR LA Performance Système de filtration d’eau intérieurModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie DU Réfrigérateur Kitchenaid Garantie LimitéePage W10329364A EN/FR PN W10329363A All rights reserved

W10329364A specifications

The KitchenAid W10329364A is a vital accessory designed specifically for KitchenAid stand mixers, enhancing their versatility and expanding their functionality. This attachment exemplifies the brand's commitment to innovation and quality, making it a popular choice among home cooks and professional chefs alike.

One of the standout features of the W10329364A is its ability to streamline food preparation processes. This attachment is particularly known for its efficient chopping and slicing capabilities. Equipped with sharp stainless-steel blades, it can handle a variety of ingredients, from vegetables to fruits, ensuring consistent results every time. The attachment's design allows for precise control over the thickness and texture of the sliced items, making it ideal for crafting everything from salads to garnishes.

A significant technological advancement of the KitchenAid W10329364A is its compatibility with all KitchenAid stand mixers. This seamless integration means that users can easily attach and detach the unit as needed, significantly reducing prep time in the kitchen. The ability to use the power of a stand mixer for other tasks eliminates the need for multiple kitchen appliances, making it a space-saving solution.

The KitchenAid W10329364A also boasts an ergonomic design that enhances user experience. It includes a food pusher that guides ingredients safely into the blades, minimizing waste and maximizing efficiency. The attachment is crafted from high-quality materials, ensuring durability and reliability over time, even with regular use in a busy kitchen.

Maintenance of the W10329364A is straightforward, as most parts are dishwasher safe, allowing for easy cleanup after food preparation. This convenience appeals to those who value efficiency and want to ensure their kitchen remains tidied up after cooking.

In conclusion, the KitchenAid W10329364A is a powerful and efficient accessory that transforms the capabilities of KitchenAid stand mixers. With its precise slicing and chopping features, compatibility with stand mixers, and user-friendly design, it is an essential tool for anyone looking to elevate their culinary skills. Whether you are a novice cook or a seasoned chef, this attachment can save you time and enhance the creativity of your meal preparations.
Top Page Image Contents