KitchenAid manual Installation Requirements, Tools and Parts, Refrigerator Side Trim

Page 15

Refrigerator

Side Trim

3/8"

(9.7 mm)

1/16"

(1.5 mm)

1/8"

(3.2 mm)

Overlay

233/8"

(59.40 cm)

3/16"

(4.5 mm)

Recessed Inset Installation Dimensions

1.Measure the distance from point A (as shown) to back wall.

2.Route the front edge of the support board or attach a ³⁄₈" (9.5 mm) board to hold the panel in the cabinet side trim.

A

INSTALLATION

REQUIREMENTS

Tools and Parts

IMPORTANT:

Installer: Leave Installation Instructions with the homeowner.

Homeowner: Keep Installation Instructions for future reference. Save these Installation Instructions for the local electrical inspector’s use.

TOOLS NEEDED:

Make sure that you have the tools necessary for proper installation:

Hand drill or electric drill

T27 flat-head 6 point

 

(properly grounded)

 

driver

Drill bits

¹¹⁄₃₂" nut driver

Two adjustable wrenches

³⁄₈" and ¹⁄₂" open-end

 

 

 

wrenches

Phillips screwdriver

⁵⁄₃₂" Allen wrench

Inset Installation Dimensions

1.Measure the distance from point A (as shown) to the back wall. Add ¹⁄₃₂" (0.8 mm) to this measurement to allow the side panel to fit into the trim.

2.If the panel is more than ³⁄₈" (9.5 mm) thick, route the front edge to allow the side panel to fit into the trim.

A

Small level

⁵⁄₁₆" socket wrench

Appliance dolly

Tape measure

PARTS NEEDED:

Six #8 x 3" (7.6 cm) wood screws (longer screws may be needed)

One or two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood board(s)

Order factory panels, make custom panels or consult a qualified cabinetmaker or carpenter to make the panels.

Classic Series: Order factory panels, make custom panels, or consult a qualified cabinetmaker or carpenter to make the panels. See “Design Specifications” for more information.

Overlay Series: Make custom panels, or consult a qualified cabinetmaker or carpenter to make the panels. See “Installation Requirements” and “Design Specifications” for more information.

Pro Line™, Complete and Architect® Series are shipped complete.

If you are connecting the water line directly to copper tubing and not to a shutoff valve, you need a ferrule, a union, and a ¹⁄₄" (6.35 mm) compression fitting.

15

Image 15
Contents Side by Side BUILT-IN Refrigerator Table of Contents/Índice/Table des matièresTable of Contents ÍndiceTable DES Matières Your safety and the safety of others are very important Refrigerator SafetyOverlay Series Design SpecificationsModels Side by Side Non-Dispensing Refrigerators Architect SeriesModels Side by Side Dispensing Refrigerators Classic SeriesComplete Series Top View Product DimensionsSide View Front ViewModels DoorSwing DimensionsTipping Radius Forward Tipping RadiusHandleandDoorClearances Overlay Series Door Classic SeriesCustom Panels Classic SeriesFactory Panelsand KitsStandard Handle Top View Door Panels for Dispenser ModelsTop Grille Panel Routing Requirements Door Panels Routing Requirements46¹⁄₂ 118.11 cm OverlaySeries CustomPanels34¹⁄₂ 87.63 cm 40¹⁄₂ 102.87 cmOverlaySeries Custom Side Panels Classic, Architect and Pro Line Series Custom Side PanelsMeasure the distance from point a as shown to back wall Installation RequirementsTools and Parts Refrigerator Side TrimLocation should permit doors to open fully. See Door Opening DimensionsSwing Dimensions Location RequirementsCold Water Supply Electrical RequirementsWater Supply Requirements Recommended Grounding MethodClassic and Overlay Series Installation InstructionsUnpackRefrigerator Reduce TippingRadiusConnect Water Supply Install Anti-Tip BoardsTo Install Anti-tip Boards Style 1 Connecting to a Water ValveMove Refrigerator toFinal Position Install ClassicSeries CustomPanelsLowerLevelingLegs Plug in RefrigeratorInstall OverlaySeries Custom Panels Door Panel InstallationReinstall the handle-side and top trims Level Refrigerator Adjustand Remove Doors Install Side Panel Install Base GrilleComplete Installation Su seguridad y la seguridad de los demás es muy importante Seguridad DEL RefrigeradorModelos Refrigeradores de dos puertas sin despachador Especificaciones DE DiseñoSerie Completa Modelos Refrigeradores de dos puertas con despachadorVista frontal Medidasdel productoVista lateral Vista superiorArco de vuelco lateral Arco devuelcoMedidas de oscilación de las puertas Arco de vuelco hacia adelante Modelos deEspaciospara la agarradera y la puerta Serie Overlay Soporte Panelesde la puerta a la medida para la Serie Classic Panelesy juegosde fábrica delaSerie ClassicSuperior Paneles de puerta para modelos con despachadorRequisitos de contorneado del panel de la rejilla Requisitos de contorneado de los paneles de la puertaPaneles a la medida de la Serie Overlay Paneles decorativos Overlay ModeloPaneles de soporte Modelo Paneles laterales a la medida para la Serie Overlay Piezas y Herramientas Requisitos DE InstalaciónMedidas de la abertura Requisitosde ubicaciónRequisitoseléctricos Método de conexión a tierra recomendadoSuministro de agua fría Series Classic y Overlay Instrucciones DE InstalaciónCómo desempacarsurefrigerador Cómoreducirelarco de vuelcoCómo instalar los tableros antivuelco Cómo instalarlos tablerosantivuelcoCómoconectar el suministro de agua Serie Pro LineEstilo 2 Conexión a una tubería de agua Cómo enchufarel refrigeradorUbicación final delrefrigerador Estilo 1 Conexión a una válvula de aguaPulg lb cm kg Baje las patas niveladorasCómo instalarlos panelesa la medida para la Serie Classic Paneles de la puertaInstalación del panel de la puerta Cómo instalarlos panelesa la medida para la Serie OverlaySiga los siguientes pasos para volver a instalar la puerta Cómonivelar el refrigeradorAjuste y quite las puertas Cómo quitar la puertaQuite la placa de traba, como se muestra Cómoinstalarel panellateralCómo ajustar la oscilación de las puertas Modelos OverlayCómoterminarla instalación Cómo instalarla rejilla de la baseVotre sécurité et celle des autres est très importante Sécurité DU RéfrigérateurSérie Overlay Série Classic Spécifications DE DesignModèles Réfrigérateurs côte à côte sans distributeur Série ArchitectModèles Réfrigérateurs côte à côte avec distributeur Série OverlaySérie Complète Vue de dessus Dimensionsdu produitVue latérale Vue avantRayon de basculement avant Dimensionspourle pivotement des portesRayon debasculement Modèles deDégagementspourlespoignées et portes Série Overlay Panneau Panneaux personnalisés de la Série Classic Ensembles de panneaux dorigine de la série ClassicPoignée standard Vue supérieure Panneaux de porte pour modèles avec distributeurExigences dusinage du panneau de la grille supérieure Exigences dusinage des panneaux de portePanneaux de soutien Modèle Panneaux personnalisés de la série OverlayPanneaux latéraux personnalisés de la Série Overlay Outillage etpiècesnécessaires Exigences ’INSTALLATIONModèle Largeur a tel quillustré ci-dessus Exigences d’emplacementDimensions de l’ouverture Supérieure. Voir Dimensions de l’ouvertureArrivée d’eau froide Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauSéries Classic et Overlay Instructions D’INSTALLATIONDéballage du réfrigérateur Réduction du rayon de basculementSérie Pro Line Installation de planchesantibasculementInstallation des planches antibasculement Série ArchitectStyle 1 Raccordement à la canalisation deau Déplacementdu réfrigérateurà Lemplacement finalRaccordementde la canalisation d’eau Brancherle réfrigérateurInstallation des panneaux personnalisés de la Série Classic Déploiement despiedsde nivellementPanneaux de porte Installation des panneaux de porte Installation despanneaux personnalisés de la Série OverlayTringle supérieure Enlèvement des portes Suivre les étapes suivantes pour réinstaller la porteNivellementdu réfrigérateur Ajustementetenlèvement desportesInstallation du panneau latéral Ajustement de l’ouverture des portesModèles Overlay Acheverl’installation Installation de la grille de la baseAll rights reserved 2266811A
Related manuals
Manual 23 pages 20.17 Kb

Refrigerator specifications

The KitchenAid 338 Refrigerator, model 4KSRF42D, is an exemplary appliance that combines functionality with a sleek design, making it a prime choice for modern kitchens. This refrigerator offers an impressive blend of features, technologies, and characteristics that elevate food storage and preservation.

One of the standout features of the 4KSRF42D is its spacious interior. With a total capacity that accommodates a significant amount of groceries, this refrigerator ensures that there is ample room for all your food items and beverages. Configured with adjustable shelves and spacious bins, organization and access to your favorite foods are simple and efficient.

The refrigerator incorporates the innovative Preserva Food Care System. This advanced technology utilizes dual cooling systems that maintain optimal humidity levels and temperature, helping to keep fruits and vegetables fresher for longer periods. The system cleverly prevents the transfer of odors between the refrigerator and freezer, ensuring that your food maintains its intended flavor.

Another notable characteristic of the KitchenAid 338 is its sleek stainless-steel exterior, which not only looks modern but is also easy to clean. The fingerprint-resistant finish helps keep the appliance looking immaculate, even in bustling kitchen environments. Additionally, the countertop depth design means it seamlessly integrates into kitchen cabinetry for a built-in look.

Energy efficiency is a key consideration for modern consumers, and the 4KSRF42D excels in this regard as it meets Energy Star certification standards. This ensures minimal energy consumption without compromising on performance, ultimately reducing your utility bills while being environmentally friendly.

The refrigerator is equipped with a sophisticated ice maker located in the freezer compartment. This feature means you always have a reliable supply of ice at hand for those hot summer days or entertaining guests. The easy-to-access water dispenser on the exterior front allows for instant hydration with filtered water.

In terms of digital technology, the KitchenAid 338 comes with an intuitive LCD display that allows users to easily monitor and adjust temperature settings in both compartments. Smart functionality ensures that users can even receive alerts to changes in temperature through mobile notifications, offering added convenience.

Overall, the KitchenAid 338 Refrigerator, model 4KSRF42D, is a culmination of advanced features and elegant design. Its emphasis on preserving food quality, energy efficiency, and user-friendly technology makes it an excellent addition to any contemporary kitchen. Whether you are an avid home chef or simply looking to upgrade your kitchen appliances, this refrigerator constitutes a worthy investment that promises reliability and aesthetic appeal.