KitchenAid Refrigerator manual Install OverlaySeries Custom Panels, Door Panel Installation

Page 21

5.Replace the door handles. Check to be sure that the top of both door handles are aligned.

6.If the door handles are not aligned, loosen all handle screws and adjust door handles up or down. Tighten the screws. If any of the door screws are damaged, replace them with additional screws provided in the parts package.

Top Grille Panel

1.Grasp both ends of the top grille.

2.Push straight up, then pull straight out. Place the top grille panel-side down on a soft working surface.

BAB

A. Top grille

B. Cabinet side trim

3.Remove one end cap by loosening the nuts and sliding the end cap off.

A

 

C

 

B

 

D

 

A. Bottom rail

C. End cap

B. Nuts

D. Top rail

4.Slide the decorative panel into the top grille channel and reattach the end cap.

A

A. Backer panel

5.Replace the top grille in the cabinet side trims and pull the panel down slightly to lock it into place.

BAB

A. Top grille

B. Cabinet side trim

Install OverlaySeries Custom Panels

IMPORTANT:

Install the custom handles prior to installing the panels on the refrigerator. For more information on KitchenAid custom handle selection, refer to the KitchenAid Catalog, visit www.kitchenaid.com, or call 1-800-422-1230.

In Canada, visit www.KitchenAid.ca, or call 1-800-806-6777.

Create custom door overlay panels according to the specifications in the “Overlay Series Custom Panels” section.

KitchenAid is not responsible for the removal or addition of molding or decorative panels that would prevent the refrigerator from being serviced.

Door Panel Installation

1.Remove all tape and door bracing from the refrigerator and freezer doors.

2.Open the refrigerator and freezer compartment doors.

3.Remove the handle side and top trims.

A A

A.Trims

4.Slide the custom panels into the bottom and hinge side trims on the refrigerator compartment and freezer compartment doors, making sure that the backer panel fits into the hinge side trims.

AA

A.Panels

5.Reinstall the handle-side and top trims.

21

Image 21
Contents Side by Side BUILT-IN Refrigerator Table of Contents/Índice/Table des matièresTable of Contents ÍndiceTable DES Matières Your safety and the safety of others are very important Refrigerator SafetyModels Side by Side Non-Dispensing Refrigerators Design SpecificationsArchitect Series Overlay SeriesModels Side by Side Dispensing Refrigerators Classic SeriesComplete Series Side View Product DimensionsFront View Top ViewTipping Radius DoorSwing DimensionsForward Tipping Radius ModelsHandleandDoorClearances Overlay Series Door Classic SeriesCustom Panels Classic SeriesFactory Panelsand KitsTop Grille Panel Routing Requirements Door Panels for Dispenser ModelsDoor Panels Routing Requirements Standard Handle Top View34¹⁄₂ 87.63 cm OverlaySeries CustomPanels40¹⁄₂ 102.87 cm 46¹⁄₂ 118.11 cmOverlaySeries Custom Side Panels Classic, Architect and Pro Line Series Custom Side PanelsTools and Parts Installation RequirementsRefrigerator Side Trim Measure the distance from point a as shown to back wallSwing Dimensions Opening DimensionsLocation Requirements Location should permit doors to open fully. See DoorWater Supply Requirements Electrical RequirementsRecommended Grounding Method Cold Water SupplyUnpackRefrigerator Installation InstructionsReduce TippingRadius Classic and Overlay SeriesTo Install Anti-tip Boards Install Anti-Tip BoardsStyle 1 Connecting to a Water Valve Connect Water SupplyLowerLevelingLegs Install ClassicSeries CustomPanelsPlug in Refrigerator Move Refrigerator toFinal PositionInstall OverlaySeries Custom Panels Door Panel InstallationReinstall the handle-side and top trims Level Refrigerator Adjustand Remove Doors Install Side Panel Install Base GrilleComplete Installation Su seguridad y la seguridad de los demás es muy importante Seguridad DEL RefrigeradorModelos Refrigeradores de dos puertas sin despachador Especificaciones DE DiseñoSerie Completa Modelos Refrigeradores de dos puertas con despachadorVista lateral Medidasdel productoVista superior Vista frontalMedidas de oscilación de las puertas Arco devuelcoArco de vuelco hacia adelante Modelos de Arco de vuelco lateralEspaciospara la agarradera y la puerta Serie Overlay Soporte Panelesde la puerta a la medida para la Serie Classic Panelesy juegosde fábrica delaSerie ClassicRequisitos de contorneado del panel de la rejilla Paneles de puerta para modelos con despachadorRequisitos de contorneado de los paneles de la puerta SuperiorPaneles a la medida de la Serie Overlay Paneles decorativos Overlay ModeloPaneles de soporte Modelo Paneles laterales a la medida para la Serie Overlay Piezas y Herramientas Requisitos DE InstalaciónMedidas de la abertura Requisitosde ubicaciónRequisitoseléctricos Método de conexión a tierra recomendadoSuministro de agua fría Cómo desempacarsurefrigerador Instrucciones DE InstalaciónCómoreducirelarco de vuelco Series Classic y OverlayCómoconectar el suministro de agua Cómo instalarlos tablerosantivuelcoSerie Pro Line Cómo instalar los tableros antivuelcoUbicación final delrefrigerador Cómo enchufarel refrigeradorEstilo 1 Conexión a una válvula de agua Estilo 2 Conexión a una tubería de aguaCómo instalarlos panelesa la medida para la Serie Classic Baje las patas niveladorasPaneles de la puerta Pulg lb cm kgInstalación del panel de la puerta Cómo instalarlos panelesa la medida para la Serie OverlayAjuste y quite las puertas Cómonivelar el refrigeradorCómo quitar la puerta Siga los siguientes pasos para volver a instalar la puertaCómo ajustar la oscilación de las puertas Cómoinstalarel panellateralModelos Overlay Quite la placa de traba, como se muestraCómoterminarla instalación Cómo instalarla rejilla de la baseVotre sécurité et celle des autres est très importante Sécurité DU RéfrigérateurModèles Réfrigérateurs côte à côte sans distributeur Spécifications DE DesignSérie Architect Série Overlay Série ClassicModèles Réfrigérateurs côte à côte avec distributeur Série OverlaySérie Complète Vue latérale Dimensionsdu produitVue avant Vue de dessusRayon debasculement Dimensionspourle pivotement des portesModèles de Rayon de basculement avantDégagementspourlespoignées et portes Série Overlay Panneau Panneaux personnalisés de la Série Classic Ensembles de panneaux dorigine de la série ClassicExigences dusinage du panneau de la grille supérieure Panneaux de porte pour modèles avec distributeurExigences dusinage des panneaux de porte Poignée standard Vue supérieurePanneaux de soutien Modèle Panneaux personnalisés de la série OverlayPanneaux latéraux personnalisés de la Série Overlay Outillage etpiècesnécessaires Exigences ’INSTALLATIONDimensions de l’ouverture Exigences d’emplacementSupérieure. Voir Dimensions de l’ouverture Modèle Largeur a tel quillustré ci-dessusSpécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Arrivée d’eau froideDéballage du réfrigérateur Instructions D’INSTALLATIONRéduction du rayon de basculement Séries Classic et OverlayInstallation des planches antibasculement Installation de planchesantibasculementSérie Architect Série Pro LineRaccordementde la canalisation d’eau Déplacementdu réfrigérateurà Lemplacement finalBrancherle réfrigérateur Style 1 Raccordement à la canalisation deauInstallation des panneaux personnalisés de la Série Classic Déploiement despiedsde nivellementPanneaux de porte Installation des panneaux de porte Installation despanneaux personnalisés de la Série OverlayTringle supérieure Nivellementdu réfrigérateur Suivre les étapes suivantes pour réinstaller la porteAjustementetenlèvement desportes Enlèvement des portesInstallation du panneau latéral Ajustement de l’ouverture des portesModèles Overlay Acheverl’installation Installation de la grille de la baseAll rights reserved 2266811A
Related manuals
Manual 23 pages 20.17 Kb

Refrigerator specifications

The KitchenAid 338 Refrigerator, model 4KSRF42D, is an exemplary appliance that combines functionality with a sleek design, making it a prime choice for modern kitchens. This refrigerator offers an impressive blend of features, technologies, and characteristics that elevate food storage and preservation.

One of the standout features of the 4KSRF42D is its spacious interior. With a total capacity that accommodates a significant amount of groceries, this refrigerator ensures that there is ample room for all your food items and beverages. Configured with adjustable shelves and spacious bins, organization and access to your favorite foods are simple and efficient.

The refrigerator incorporates the innovative Preserva Food Care System. This advanced technology utilizes dual cooling systems that maintain optimal humidity levels and temperature, helping to keep fruits and vegetables fresher for longer periods. The system cleverly prevents the transfer of odors between the refrigerator and freezer, ensuring that your food maintains its intended flavor.

Another notable characteristic of the KitchenAid 338 is its sleek stainless-steel exterior, which not only looks modern but is also easy to clean. The fingerprint-resistant finish helps keep the appliance looking immaculate, even in bustling kitchen environments. Additionally, the countertop depth design means it seamlessly integrates into kitchen cabinetry for a built-in look.

Energy efficiency is a key consideration for modern consumers, and the 4KSRF42D excels in this regard as it meets Energy Star certification standards. This ensures minimal energy consumption without compromising on performance, ultimately reducing your utility bills while being environmentally friendly.

The refrigerator is equipped with a sophisticated ice maker located in the freezer compartment. This feature means you always have a reliable supply of ice at hand for those hot summer days or entertaining guests. The easy-to-access water dispenser on the exterior front allows for instant hydration with filtered water.

In terms of digital technology, the KitchenAid 338 comes with an intuitive LCD display that allows users to easily monitor and adjust temperature settings in both compartments. Smart functionality ensures that users can even receive alerts to changes in temperature through mobile notifications, offering added convenience.

Overall, the KitchenAid 338 Refrigerator, model 4KSRF42D, is a culmination of advanced features and elegant design. Its emphasis on preserving food quality, energy efficiency, and user-friendly technology makes it an excellent addition to any contemporary kitchen. Whether you are an avid home chef or simply looking to upgrade your kitchen appliances, this refrigerator constitutes a worthy investment that promises reliability and aesthetic appeal.