Install Anti-Tip Boards, Pro Line Series

3.Remove the 6 screws attaching each cabinet side trim to the refrigerator and remove the side trims.

4.Stand the refrigerator up by first placing the left bottom edge of the refrigerator on the floor, standing the refrigerator upright and then lowering the right-hand side of the refrigerator down to the floor.

5.Reassemble the trim and top grille after the dolly has been removed from the refrigerator.

Pro Line™ Series

1.Grasp both ends of the top grille.

2.Push the top grille straight up, and then pull straight out.

3.Disconnect the wiring harness from the back of the top grille.

4.Lay the top grille on a soft surface.

5.Remove the 6 screws that attach each cabinet side trim to the refrigerator, and remove the side trims.

6.Stand the refrigerator up. First, place the left bottom edge of the refrigerator on the floor, stand the refrigerator upright and then lower the right-hand side of the refrigerator to the floor.

7.After the dolly has been removed from the refrigerator, reassemble the trim.

8.Reattach wiring harness into grille back.

9.Insert top grille hooks into slots on the side trim. Pull grille down slightly to lock into place.

Install Anti-Tip Boards

IMPORTANT:

■The solid soffit must be within 1" (2.5 cm) maximum above the refrigerator. If the solid soffit is higher than 1" (2.5 cm) or one is not available, prevent the refrigerator from tipping during use as shown.

■It is recommended that board(s) be installed before the refrigerator is installed.

■Board(s) must be long enough to fully cover the width of the compressor cover.

■Locate the board(s) so the bottom surface(s) of the board(s) is(are) 84" (213 cm) from the floor.

■During installation, raise the refrigerator up so there is ¹⁄₄" (6.35 mm) maximum between the top of the refrigerator and the bottom of the anti-tip board(s). Do not crush the condenser cover when raising the rear leveling legs.

To Install Anti-tip Boards

1.Mark the stud locations on rear wall 80" to 90" (203 cm to 229 cm) above floor.

2.Securely attach one or two 2" x 4" x 32" (5 cm x 10 cm x

81 cm) wood boards to wall studs behind refrigerator. Use six #8 x 3" (7.6 mm) (or longer) wood screws. The wood screws must be screwed into the studs at least 1½" (3.8 cm). The board(s) must overlap the compressor cover.

A B

2" (5 cm)

A. Center board ¹⁄₄" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

Connect Water Supply

1.Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.

2.Before attaching copper tubing to the refrigerator, flush at least 2 qt. (1.9 L) of water through the copper tubing and into a bucket to get rid of any particles in the water line.

3.Check for leaks around the saddle valve. Do not overtighten the clamp or sleeve. This will crush the copper tubing.

4.Make connection to the refrigerator.

Style 1 - Connecting to a Water Valve:

NOTE: The water shutoff valve should be located in the base cabinet on either side of the refrigerator. The right-hand side is recommended. The access hole through the right cabinet must be within ¹⁄₂" (12.7 mm) of rear wall.

Push the bulb end of the tubing into the water valve as far as it will go. Slide the nut forward and finger tighten. Then tighten it with a wrench two more turns. Do not overtighten.

A.Bulb

B.Nut (provided)

Refrigerator specifications

The KitchenAid 338 Refrigerator, model 4KSRF42D, is an exemplary appliance that combines functionality with a sleek design, making it a prime choice for modern kitchens. This refrigerator offers an impressive blend of features, technologies, and characteristics that elevate food storage and preservation.

One of the standout features of the 4KSRF42D is its spacious interior. With a total capacity that accommodates a significant amount of groceries, this refrigerator ensures that there is ample room for all your food items and beverages. Configured with adjustable shelves and spacious bins, organization and access to your favorite foods are simple and efficient.

The refrigerator incorporates the innovative Preserva Food Care System. This advanced technology utilizes dual cooling systems that maintain optimal humidity levels and temperature, helping to keep fruits and vegetables fresher for longer periods. The system cleverly prevents the transfer of odors between the refrigerator and freezer, ensuring that your food maintains its intended flavor.

Another notable characteristic of the KitchenAid 338 is its sleek stainless-steel exterior, which not only looks modern but is also easy to clean. The fingerprint-resistant finish helps keep the appliance looking immaculate, even in bustling kitchen environments. Additionally, the countertop depth design means it seamlessly integrates into kitchen cabinetry for a built-in look.

Energy efficiency is a key consideration for modern consumers, and the 4KSRF42D excels in this regard as it meets Energy Star certification standards. This ensures minimal energy consumption without compromising on performance, ultimately reducing your utility bills while being environmentally friendly.

The refrigerator is equipped with a sophisticated ice maker located in the freezer compartment. This feature means you always have a reliable supply of ice at hand for those hot summer days or entertaining guests. The easy-to-access water dispenser on the exterior front allows for instant hydration with filtered water.

In terms of digital technology, the KitchenAid 338 comes with an intuitive LCD display that allows users to easily monitor and adjust temperature settings in both compartments. Smart functionality ensures that users can even receive alerts to changes in temperature through mobile notifications, offering added convenience.

Overall, the KitchenAid 338 Refrigerator, model 4KSRF42D, is a culmination of advanced features and elegant design. Its emphasis on preserving food quality, energy efficiency, and user-friendly technology makes it an excellent addition to any contemporary kitchen. Whether you are an avid home chef or simply looking to upgrade your kitchen appliances, this refrigerator constitutes a worthy investment that promises reliability and aesthetic appeal.