KitchenAid SIDE BY SIDE REFRIGERATOR manual Ice Maker and Storage Bin

Page 16

2.Slide the cartridge cap off the end of the filter cartridge. Do not discard the cap. With the cartridge cap in the vertical position, insert the cap into the base grille until it stops.

3.Rotate the cartridge cap to a horizontal position. The cartridge cap might not be even with the base grille.

Ice Maker and Storage Bin

(on some models - Accessory)

Style 1

To Turn the Ice Maker On/Off:

The on/off switch for the ice maker is a wire shutoff arm located on the side of the ice maker.

1.To turn the ice maker on, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position.

2.To manually turn the ice maker off, lift the wire shutoff arm to the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate.

NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

2.To manually turn the ice maker off, slide the control to the OFF (right) position.

To Remove and Replace the Ice Storage Bin:

1.Hold the base of the storage bin with both hands and press the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover (“flipper door”) on the left wall of the freezer stops the ice maker from producing ice if the door is open or the storage bin is removed.

2.Replace the storage bin on the door and push down to make sure it is securely in place.

To Remove and Replace Ice Storage Bin:

1.Pull the covering panel out from the bottom and then slide it back toward the rear.

2.Lift the wire shutoff arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made.

3.Lift up the front of the storage bin and pull it out.

4.Replace the bin by pushing it in all the way or the dispenser will not work. Push the wire shutoff arm down to the ON position to restart ice production. Make sure the door is closed tightly.

Style 2

To Turn the Ice Maker On/Off:

The ON/OFF switch is located on the top right side of the freezer compartment.

1.To turn the ice maker on, slide the control to the ON (left) position.

Clean the Ice Storage Bin

1.Empty the ice container. Use warm water to melt the ice if necessary.

NOTE: Do not use anything sharp to break up the ice in the bin. This can cause damage to the ice container and the dispenser mechanism.

2.Wash ice bin with a mild detergent, rinse well and dry thoroughly. Do not use harsh or abrasive cleaners or solvents.

Remember

■Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

■Discard the first three batches of ice produced to avoid impurities that may be flushed out of the system.

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker.

■Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■It is normal for the ice cubes to be attached at the corners. They will break apart easily.

■For Style 1 ice maker, do not force the wire shutoff arm up or down.

■Do not store anything on top of the ice maker or in the ice storage bin.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Table of Contents/Table des matières Side by Side RefrigeratorTable DES Matières Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerInstallation Instructions Clean Before UsingUnpack the Refrigerator Location RequirementsWater Supply Requirements Electrical RequirementsBase Grille Refrigerator Doors Adjustthe Doors Reconnect both ground wires Reconnect wiring plugRemove the Doors Replace the Doors and HingesConnectthe Water Supply Connect to Water LineConnect to Refrigerator Style 1 Connection to Water Valve Style 2 Connection to Water LineComplete the Installation Prepare the Water SystemFactoryTrimKit StyleInstall Custom Wood Panels Dimensions for Custom Wood PanelsRemove the Door Panels Replace the Door PanelsUsingthe Controls Dimensions for Routing Handle Side of Door Panel End ViewRefrigerator USE Ensuring Proper Air CirculationAdjusting Slide Controls Adjusting Electronic ControlsAdditional Electronic Control Panel Features Water Filter Indicator Light and ResetWater and Ice Dispensers To Dispense Ice Water DispenserTo Dispense Water Dispenser Light StyleUsing the Dispenser Without the Water Filter Cartridge WaterFilter Status LightWaterFiltration System Changing the Water Filter CartridgeIce Maker and Storage Bin Refrigerator Features Convertible Vegetable/Meat Drawer Temperature ControlRefrigerator Shelves Convertible Vegetable/MeatDrawer Crisper and CoversFreezer Features Door Features Refrigerator CareChanging the Light Bulbs Dispenser Light on some modelsRefrigerator Control Panel Light Crisper LightsPowerInterruptions Vacation and MovingCareTemperature and Moisture TroubleshootingRefrigerator Operation Ice and Water TheU.S.A Assistance or ServiceCanada Accessories Stainless Steel Cleaner & PolishWater Filter Certifications Base grille water filter cartridgesProduct Data Sheets Application Guidelines/Water Supply ParametersKitchenaid Refrigerator Warranty ONE-YEAR Full Warranty on RefrigeratorLifetime Limited Warranty on Door Bins and can Racks KitchenAid or KitchenAid Canada will not pay forAvant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurEnlever les portes Instructions D’INSTALLATION Exigences demplacementDéballage du réfrigérateur Enlèvement des matériaux demballageSpécifications de l’alimentation en eau Spécifications électriquesGrille de la base Portesdu réfrigérateur Replacer les portes et les charnières Enlever les portesRaccordement delacanalisation deau Ajuster lesportesRaccordement à une canalisation d’eau Achever l’installation Préparerlesystème d’eauStyle 2 Connexion à la canalisation deau Style 3 Connexion au robinet darrêtRemplacement des panneaux de porte Installation des panneaux personnalisés en boisEnsembles décoratifs de l’usine Enlèvement des panneaux de la porteDimensions pour les panneaux en bois personnalisés Sons normauxExigences de poids pour les encarts de panneaux en relief Porte du congélateur et réfrigérateur de 25 pi cuUtilisation des commandes Commandes à curseur sur certains modèlesImportant Toutes les commandes Utilisation DU RéfrigérateurAjustement des commandes à curseur Commandes électroniques sur certains modèlesAjustement des commandes électroniques Autres caractéristiques du tableau de commande électroniqueCommandes numériques sur certains modèles Ajustement des commandes numériquesAutres caractéristiques du tableau de commande numérique Temperature System système de températureDistributeurs d’eau etde glaçonssur certainsmodèles Le distributeur de glaçonsLe distributeur d’eau Lumière du distributeur StyleRemplacement du filtre à eau Distributeur Tableau de commandeLe témoin lumineux de l’état du filtre à eau Système de filtration d’eauPurge du système d’eau après le remplacement du filtre Pour retirer et réinstaller le bac à glaçonsMachineàglaçons et bacd’entreposage Style Mise en marche/arrêt de la machine à glaçonsCaractéristiques DU Réfrigérateur Tablettesdu réfrigérateurPour enlever et replacer le bac à glaçons dans la porte Entretien du bac d’entreposage de glaçonsPour entreposer des légumes Régler la commande à VEG Tiroirpourspécialités alimentairesAjustement du réglage Guide d’entreposage des viandesCaractéristiques DU Congélateur Caractéristiques DE LA Porte Remplacement des ampoulesd’éclairage Entretien DU RéfrigérateurNettoyage Nettoyage du réfrigérateurLampe du tableau de commande du réfrigérateur Lampe de distributeur sur certains modèlesLampe du bac à légumes Lampe supérieure du congélateur sur certains modèlesPannes de courant Entretien avant les vacances ou lors ’un déménagementStyle 2 En arrière du panier du congélateur DéménagementDépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauLe distributeur deau ne fonctionne pas correctement De leau suinte du distributeurLeau du distributeur nest pas assez froide Secondes après avoir relâché le levier du distributeurAssistance OU Service AccessoiresFeuilles DE Données SUR LE Produit 33 100F 0,6 37,8CGarantie DU Réfrigérateur Kitchenaid Garantie Complète DE UN AN SUR LE RéfrigérateurKitchenAid ou KitchenAid Canada ne paiera pas pour Autorisée par KitchenAid Canada ou téléphoner au2305802A All rights reserved

SIDE BY SIDE REFRIGERATOR specifications

The KitchenAid Side by Side Refrigerator is a quintessential blend of style, functionality, and advanced technology, making it a popular choice among modern households. With its sleek design and stainless steel finish, this refrigerator is not just an appliance, but a statement piece for any kitchen decor.

One of the main features of the KitchenAid Side by Side Refrigerator is its spacious interior. It typically offers an impressive capacity, which allows ample room for storing groceries, beverages, and leftovers. The side-by-side design ensures that both the refrigerator and freezer sections are easily accessible, making organization simple and efficient.

The refrigerator is equipped with adjustable shelves, giving users the flexibility to configure the interior space according to their needs. This allows homeowners to store larger items, such as tall bottles or party platters, without any hassle. The shelf material is often made of glass, providing a sleek appearance and ease of cleaning.

KitchenAid employs advanced technology in their side-by-side refrigerators to enhance food preservation. The Adaptive Defrost feature intelligently modifies the defrosting cycle based on usage patterns, ensuring that energy is not wasted. Additionally, the Exterior Ice and Water Dispenser provides quick access to filtered water and ice, which is essential for any household. The dispenser's design minimizes spills and can accommodate larger containers for added convenience.

Another notable characteristic is the Complete Dual Cooling System. This system helps maintain optimal humidity levels in the refrigerator compartment while efficiently freezing food in the freezer. By having separate cooling systems, the ingredients are kept fresher for longer, and the transfer of odors between compartments is minimized.

For tech-savvy users, the KitchenAid Side by Side Refrigerator may include features such as a built-in digital display, allowing easy temperature adjustments and settings. Smart technology integration may also enable users to monitor the status of their refrigerator remotely through a smartphone app.

In terms of energy efficiency, many models feature Energy Star certification, indicating they consume less energy and reduce the household carbon footprint. This makes the KitchenAid Side by Side Refrigerator not only user-friendly but also environmentally conscious.

Overall, the KitchenAid Side by Side Refrigerator combines aesthetics with innovative functionality, making it an essential appliance for those who value efficient food storage and modern design. Whether you're a budding chef or simply seeking convenience, this refrigerator caters to all culinary needs.
Top Page Image Contents