KitchenAid SIDE BY SIDE REFRIGERATOR manual Adjustthe Doors, Remove the Doors

Page 7

Remove the Doors

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1.Unplug refrigerator or disconnect power.

2.Open both refrigerator doors. Remove the base grille by pulling up on the bottom outside corners. See Graphic 1.

3.Close both doors and keep them closed until you are ready to lift them free from the cabinet.

4.If you have a dispenser (ice or water), disconnect the water dispenser tubing located behind the base grille on the freezer door side. See Graphic 2.

■Press the red outer ring against the face of fitting and pull the dispenser tubing free.

■On some models, remove tubing from hose clip.

5.Remove top left hinge screw and cover as shown in Graphic 3.

6.Disconnect wiring plug and both ground wires from the ground wire screw (on some models) as shown in Graphic 3.

7.Remove remaining left hinge screws and hinge as shown in Graphic 3. Do not remove screw A.

8.Lift freezer door straight up off bottom hinge. See Graphic 4. The water dispenser tubing remains attached to the freezer door and pulls through the bottom left hinge. Make sure you protect the dispenser tubing from damage.

9.Remove top right hinge cover and screws as shown in Graphic 5. Do not remove screw A.

10.Lift the refrigerator door straight up off bottom hinge.

11.It may not be necessary to remove the bottom hinge to move the refrigerator through a doorway. Both bottom hinges have similar construction.

■Disassemble the hinges as shown in Graphic 6. Do not remove screw A.

Replace the Doors and Hinges

1.Replace both bottom hinges, if removed. Tighten screws.

2.Assistance may be needed to feed the water dispenser tubing through the bottom hinge while reinstalling the freezer door. Feed the dispenser tubing through the bottom left hinge before replacing the door on the hinge.

NOTE: Provide additional support for the doors while the top hinges are being replaced. Do not depend on the door magnets to hold the doors in place while you are working.

3.Reconnect water dispenser tubing by pushing tubing into fitting until it stops and black mark touches the face of the red outer ring. See Graphic 2. On some models, replace tubing in hose clip.

4.Align and replace the top left hinge as shown in Graphic 3. Tighten screws.

WARNING

Electrical Shock Hazard

Reconnect both ground wires.

Failure to do so can result in death or electrical shock.

Style 1

■Reconnect both ground wires.

■Reconnect wiring plug.

C

D

A

B

A. Do not remove screw A

B. Ground wires

C. Green ground wire screw

D. Wiring plug

Style 2

■ Reconnect wiring plug.

5.Replace left hinge cover and screws.

6.Replace the refrigerator door by lifting the door onto the bottom right hinge.

7.Align and replace the top right hinge as shown in Graphic 5. Tighten screws.

8.Replace hinge cover and screws. Tighten screws.

9.Plug into a grounded 3 prong outlet.

Adjustthe Doors

Your refrigerator has two front adjustable rollers — one on the right and one on the left. If your refrigerator seems unsteady or if you want the doors to close more easily, adjust the refrigerator's tilt using the instructions below.

1.Move the refrigerator into its final position.

2.The two leveling screws are part of the front roller assemblies which are at the base of the refrigerator on either side. See Graphic 7.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Side by Side Refrigerator Table of Contents/Table des matièresTable DES Matières Before You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyLocation Requirements Installation InstructionsClean Before Using Unpack the RefrigeratorWater Supply Requirements Electrical RequirementsBase Grille Refrigerator Doors Replace the Doors and Hinges Adjustthe DoorsReconnect both ground wires Reconnect wiring plug Remove the DoorsStyle 2 Connection to Water Line Connectthe Water SupplyConnect to Water Line Connect to Refrigerator Style 1 Connection to Water ValveStyle Complete the InstallationPrepare the Water System FactoryTrimKitReplace the Door Panels Install Custom Wood PanelsDimensions for Custom Wood Panels Remove the Door PanelsEnsuring Proper Air Circulation Usingthe ControlsDimensions for Routing Handle Side of Door Panel End View Refrigerator USEWater Filter Indicator Light and Reset Adjusting Slide ControlsAdjusting Electronic Controls Additional Electronic Control Panel FeaturesWater and Ice Dispensers Dispenser Light Style To Dispense IceWater Dispenser To Dispense WaterChanging the Water Filter Cartridge Using the Dispenser Without the Water Filter CartridgeWaterFilter Status Light WaterFiltration SystemIce Maker and Storage Bin Convertible Vegetable/MeatDrawer Crisper and Covers Refrigerator FeaturesConvertible Vegetable/Meat Drawer Temperature Control Refrigerator ShelvesFreezer Features Refrigerator Care Door FeaturesCrisper Lights Changing the Light BulbsDispenser Light on some models Refrigerator Control Panel LightVacation and MovingCare PowerInterruptionsTemperature and Moisture TroubleshootingRefrigerator Operation Ice and Water TheU.S.A Assistance or ServiceCanada Base grille water filter cartridges AccessoriesStainless Steel Cleaner & Polish Water Filter CertificationsApplication Guidelines/Water Supply Parameters Product Data SheetsKitchenAid or KitchenAid Canada will not pay for Kitchenaid Refrigerator WarrantyONE-YEAR Full Warranty on Refrigerator Lifetime Limited Warranty on Door Bins and can RacksAvant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurEnlever les portes Enlèvement des matériaux demballage Instructions D’INSTALLATIONExigences demplacement Déballage du réfrigérateurSpécifications de l’alimentation en eau Spécifications électriquesGrille de la base Portesdu réfrigérateur Enlever les portes Replacer les portes et les charnièresRaccordement delacanalisation deau Ajuster lesportesRaccordement à une canalisation d’eau Style 3 Connexion au robinet darrêt Achever l’installationPréparerlesystème d’eau Style 2 Connexion à la canalisation deauEnlèvement des panneaux de la porte Remplacement des panneaux de porteInstallation des panneaux personnalisés en bois Ensembles décoratifs de l’usinePorte du congélateur et réfrigérateur de 25 pi cu Dimensions pour les panneaux en bois personnalisésSons normaux Exigences de poids pour les encarts de panneaux en reliefUtilisation DU Réfrigérateur Utilisation des commandesCommandes à curseur sur certains modèles Important Toutes les commandesAutres caractéristiques du tableau de commande électronique Ajustement des commandes à curseurCommandes électroniques sur certains modèles Ajustement des commandes électroniquesTemperature System système de température Commandes numériques sur certains modèlesAjustement des commandes numériques Autres caractéristiques du tableau de commande numériqueLumière du distributeur Style Distributeurs d’eau etde glaçonssur certainsmodèlesLe distributeur de glaçons Le distributeur d’eauSystème de filtration d’eau Remplacement du filtre à eauDistributeur Tableau de commande Le témoin lumineux de l’état du filtre à eauStyle Mise en marche/arrêt de la machine à glaçons Purge du système d’eau après le remplacement du filtrePour retirer et réinstaller le bac à glaçons Machineàglaçons et bacd’entreposageEntretien du bac d’entreposage de glaçons Caractéristiques DU RéfrigérateurTablettesdu réfrigérateur Pour enlever et replacer le bac à glaçons dans la porteGuide d’entreposage des viandes Pour entreposer des légumes Régler la commande à VEGTiroirpourspécialités alimentaires Ajustement du réglageCaractéristiques DU Congélateur Caractéristiques DE LA Porte Nettoyage du réfrigérateur Remplacement des ampoulesd’éclairageEntretien DU Réfrigérateur NettoyageLampe supérieure du congélateur sur certains modèles Lampe du tableau de commande du réfrigérateurLampe de distributeur sur certains modèles Lampe du bac à légumesDéménagement Pannes de courantEntretien avant les vacances ou lors ’un déménagement Style 2 En arrière du panier du congélateurFonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéSecondes après avoir relâché le levier du distributeur Le distributeur deau ne fonctionne pas correctementDe leau suinte du distributeur Leau du distributeur nest pas assez froideAccessoires Assistance OU Service33 100F 0,6 37,8C Feuilles DE Données SUR LE ProduitAutorisée par KitchenAid Canada ou téléphoner au Garantie DU Réfrigérateur KitchenaidGarantie Complète DE UN AN SUR LE Réfrigérateur KitchenAid ou KitchenAid Canada ne paiera pas pourAll rights reserved 2305802A

SIDE BY SIDE REFRIGERATOR specifications

The KitchenAid Side by Side Refrigerator is a quintessential blend of style, functionality, and advanced technology, making it a popular choice among modern households. With its sleek design and stainless steel finish, this refrigerator is not just an appliance, but a statement piece for any kitchen decor.

One of the main features of the KitchenAid Side by Side Refrigerator is its spacious interior. It typically offers an impressive capacity, which allows ample room for storing groceries, beverages, and leftovers. The side-by-side design ensures that both the refrigerator and freezer sections are easily accessible, making organization simple and efficient.

The refrigerator is equipped with adjustable shelves, giving users the flexibility to configure the interior space according to their needs. This allows homeowners to store larger items, such as tall bottles or party platters, without any hassle. The shelf material is often made of glass, providing a sleek appearance and ease of cleaning.

KitchenAid employs advanced technology in their side-by-side refrigerators to enhance food preservation. The Adaptive Defrost feature intelligently modifies the defrosting cycle based on usage patterns, ensuring that energy is not wasted. Additionally, the Exterior Ice and Water Dispenser provides quick access to filtered water and ice, which is essential for any household. The dispenser's design minimizes spills and can accommodate larger containers for added convenience.

Another notable characteristic is the Complete Dual Cooling System. This system helps maintain optimal humidity levels in the refrigerator compartment while efficiently freezing food in the freezer. By having separate cooling systems, the ingredients are kept fresher for longer, and the transfer of odors between compartments is minimized.

For tech-savvy users, the KitchenAid Side by Side Refrigerator may include features such as a built-in digital display, allowing easy temperature adjustments and settings. Smart technology integration may also enable users to monitor the status of their refrigerator remotely through a smartphone app.

In terms of energy efficiency, many models feature Energy Star certification, indicating they consume less energy and reduce the household carbon footprint. This makes the KitchenAid Side by Side Refrigerator not only user-friendly but also environmentally conscious.

Overall, the KitchenAid Side by Side Refrigerator combines aesthetics with innovative functionality, making it an essential appliance for those who value efficient food storage and modern design. Whether you're a budding chef or simply seeking convenience, this refrigerator caters to all culinary needs.
Top Page Image Contents