Product Data Sheets

Base Grille Water Filtration System

Tested and certified by NSF International against ANSI/NSF

Standard 42 for the reduction of Chlorine Taste and Odor, Particulate

Class II*; and against ANSI/NSF Standard 53 for the reduction of

Lead, Mercury, Benzene, Toxaphene, p-dichlorobenzene, and

Carbofuran.

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42/53.

Model WF-NL240V/NL240V Capacity 240 Gallons (908 Liters)

Substance Reduction	NSF Reduction	Average	Influent Challenge	Maximum	Average	Minimum %	Average %
Aesthetic Effects	Requirements	Influent	Concentration	Effluent	Effluent	Reduction	Reduction

Chlorine Taste/Odor	≥50%	1.94 mg/L	2.0 mg/L ± 10%	0.05 mg/L	0.05 mg/L	97.4%	97.4%
Particulate Class II*	≥85%	833,333/mL	At least 10,000	100,000/mL**	40,667/mL	88.0%	95.1%
			particles/ml

Contaminant	NSF Reduction	Average	Influent Challenge	Maximum	Average	Minimum %	Average %
Reduction	Requirements	Influent	Concentration	Effluent	Effluent	Reduction	Reduction

Lead: @ pH 6.5	0.01mg/L	0.15 mg/L***	0.15 mg/L ± 10%	0.001 mg/L	0.001 mg/L	99.3%	99.3%
Lead: @ pH 8.5	0.01mg/L	0.148 mg/L***	0.15 mg/L ± 10%	0.003 mg/L	0.001 mg/L	97.9%	99.0%

Mercury: @ pH 6.5	0.002 mg/L	0.006 mg/L	0.006 mg/L ± 10%	0.0002 mg/L	0.0002 mg/L	96.60%	96.6%
Mercury: @ pH 8.5	0.002 mg/L	0.0061 mg/L	0.006 mg/L ± 10%	0.0009 mg/L	0.00052 mg/L	85.2%	91.8%

Benzene	0.005 mg/L	0.014 mg/L	0.015 ± 10%	0.0005 mg/L	0.0005 mg/L	96.06%	96.06%

p-dichlorobenzene	0.075 mg/L	0.235 mg/L	0.225 ± 10%	0.0019 mg/L	0.0009 mg/L	99.1%	99.6%

Toxaphene	0.003 mg/L	0.014 mg/L	0.015 ± 10%	0.0012 mg/L	0.001 mg/L	92.7%	92.6%

Carbofuran	0.04 mg/L	0.077 mg/L	0.080 ± 10%	0.031 mg/L	0.0064 mg/L	61.03%	91.94%

Model WF-L400V/L400V Capacity 400 Gallons (1514 Liters)

Substance Reduction	NSF Reduction	Average	Influent Challenge	Maximum	Average	Minimum %	Average %
Aesthetic Effects	Requirement	Influent	Concentration	Effluent	Effluent	Reduction	Reduction

Chlorine Taste/Odor	≥50%	1.94 mg/L	2.0 mg/L ± 10%	0.05 mg/L	0.05 mg/L	97.4%	97.4%
Particulate Class II*	≥85%	833,333/mL	At least 10,000	100,000/mL**	40,667/mL	88.0%	95.1%
			particles/ml

Contaminant	NSF Reduction	Average	Influent Challenge	Maximum	Average	Minimum %	Average %
Reduction	Requirement	Influent	Concentration	Effluent	Effluent	Reduction	Reduction

Lead: @ pH 6.5	0.01mg/L	0.15 mg/L***	0.15 mg/L ± 10%	0.001 mg/L	0.001 mg/L	99.3%	99.3%
Lead: @ pH 8.5	0.01mg/L	0.148 mg/L***	0.15 mg/L ± 10%	0.003 mg/L	0.0014 mg/L	97.9%	99.3%

Mercury: @ pH 6.5	0.002 mg/L	0.0061 mg/L	0.006 mg/L ± 10%	0.0002 mg/L	0.0002 mg/L	96.60%	96.6%
Mercury: @ pH 8.5	0.002 mg/L	0.0061 mg/L	0.006 mg/L ± 10%	0.0009 mg/L	0.00052 mg/L	85.2%	91.8%

Benzene	0.005 mg/L	0.014 mg/L	0.015 ± 10%	0.0005 mg/L	0.0005 mg/L	96.06%	96.06%

p-dichlorobenzene	0.075 mg/L	0.235 mg/L	0.225 ± 10%	0.0019 mg/L	0.0009 mg/L	99.1%	99.6%

Toxaphene	0.003 mg/L	0.014 mg/L	0.015 ± 10%	0.0012 mg/L	0.001 mg/L	92.7%	92.6%

Carbofuran	0.04 mg/L	0.077 mg/L	0.080 ± 10%	0.031 mg/L	0.0064 mg/L	61.03%	91.94%

■ It is essential that operational, maintenance, and filter	■ Do not use with water that is microbiologically unsafe or of
replacement requirements be carried out for the product to	unknown quality without adequate disinfection before or after the
perform as advertised.	system.
■ Model WF-NL240V:Change cartridge at least every 6 months.	■ Refer to the front cover or “Assistance or Service” section for the
Use replacement cartridge NL240V, part #4396509. 2005	Manufacturer’s name, address and telephone number.
suggested retail price of $35.99 U.S.A./$59.95 Canada. Prices	■ Refer to the “Warranty” section for the Manufacturer’s limited
are subject to change without notice.
are subject to change without notice.	warranty.
Model WF-L400V:The filter monitor system measures the	warranty.

	Application Guidelines/Water Supply Parameters
amount of water that passes through the filter and alerts you	Application Guidelines/Water Supply Parameters
to replace the filter. When 90% of the filter’s rated life is used,	Water Supply	City or Well
the filter indicator light changes from green to yellow. When	Water Pressure	30 - 120 psi (207 - 827 kPa)
100% of the filter’s rated life is used, the filter indicator light	Water Temperature	33° - 100°F (0.6° - 37.8°C)
changes from yellow to red, and it is recommended that you	Service Flow Rate	0.5 gpm (1.9 L/min.) @ 60 psi.

replace the filter. Use replacement cartridge L400V, part #4396509. 2005 suggested retail price of $35.99 U.S.A./ $59.95 Canada. Prices are subject to change without notice.

■ The product is for cold water use only.

*Class II particle size: >1 to <5

**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.

***These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.

®NSF is a registered trademark of NSF International.

SIDE BY SIDE REFRIGERATOR specifications

The KitchenAid Side by Side Refrigerator is a quintessential blend of style, functionality, and advanced technology, making it a popular choice among modern households. With its sleek design and stainless steel finish, this refrigerator is not just an appliance, but a statement piece for any kitchen decor.

One of the main features of the KitchenAid Side by Side Refrigerator is its spacious interior. It typically offers an impressive capacity, which allows ample room for storing groceries, beverages, and leftovers. The side-by-side design ensures that both the refrigerator and freezer sections are easily accessible, making organization simple and efficient.

The refrigerator is equipped with adjustable shelves, giving users the flexibility to configure the interior space according to their needs. This allows homeowners to store larger items, such as tall bottles or party platters, without any hassle. The shelf material is often made of glass, providing a sleek appearance and ease of cleaning.

KitchenAid employs advanced technology in their side-by-side refrigerators to enhance food preservation. The Adaptive Defrost feature intelligently modifies the defrosting cycle based on usage patterns, ensuring that energy is not wasted. Additionally, the Exterior Ice and Water Dispenser provides quick access to filtered water and ice, which is essential for any household. The dispenser's design minimizes spills and can accommodate larger containers for added convenience.

Another notable characteristic is the Complete Dual Cooling System. This system helps maintain optimal humidity levels in the refrigerator compartment while efficiently freezing food in the freezer. By having separate cooling systems, the ingredients are kept fresher for longer, and the transfer of odors between compartments is minimized.

For tech-savvy users, the KitchenAid Side by Side Refrigerator may include features such as a built-in digital display, allowing easy temperature adjustments and settings. Smart technology integration may also enable users to monitor the status of their refrigerator remotely through a smartphone app.

In terms of energy efficiency, many models feature Energy Star certification, indicating they consume less energy and reduce the household carbon footprint. This makes the KitchenAid Side by Side Refrigerator not only user-friendly but also environmentally conscious.

Overall, the KitchenAid Side by Side Refrigerator combines aesthetics with innovative functionality, making it an essential appliance for those who value efficient food storage and modern design. Whether you're a budding chef or simply seeking convenience, this refrigerator caters to all culinary needs.