Setting the Gain, Setting the Crossover | Clarion APX1000.2 specification

SETTING THE GAIN

After completing the installation, follow these steps to set the Gain Control and then perform the Final System Checks.

1.Turn the Gain Control all the way counter-clockwise.

2.Turn the vehicle’s Ignition Switch to the ON position. Then turn the ON/OFF Switch on the source units to the ON position. Set all Tone or Equalization Controls to “flat” positions and turn Loudness off.

3.Play a CD or Tape and set the Volume Control at 75% of full level. Note: If the system uses an equalizer, set its frequency controls to “flat” positions.

4.Slowly increase the Gain Control. Stop when you hear a slight distortion of audio.

SETTING THE CROSSOVER

The Clarion APX1000.2 features a fully adjustable crossover. To set the crossover, follow these steps.

1.Set the X-Over Bypass switch to ON.

2.Using the X-Over Mode Switch, select the desired mode - LP for Low Pass, HP for High Pass.

3.Set the X-Over Slope Selection Switch to 12 or 24dB per octave.

4.Using the Freq (Hz) Control, select the desired frequency. If the desired frequency exceeds the range of the Freq (Hz) Control, press the Crossover Frequency Multiplier Switch to increase the value by a multiplier of 10.

•For example, 55Hz x 10 = 550Hz or 550Hz x 10 = 5.5kHz.

SETTING THE BASS BOOST

1.Initially set the Bass Boost control to its full left position (i.e. 0dB).

2.Listen to a variety of music styles (e.g. Rock, Rap, etc.) and slowly increase the Bass Boost control until a noticeable increase in low bass response is perceived.

3.Slowly adjust the Bass Boost control (up or down) to realize the best bass response.

CAUTION: If you hear a “pop” (due to speaker over-excursion), lower the Bass Boost to prevent speaker damage. If the system sounds muddy and distorted (due to amplifier clipping), lower Bass Boost to avoid shutdown from overheating.

APX1000.2 specifications

The Clarion APX1000.2 is a powerful and versatile amplifier designed for car audio enthusiasts seeking an upgrade to their sound system. With its robust performance and high-quality features, the APX1000.2 is built to deliver unprecedented audio experiences.

One of the standout features of the APX1000.2 is its impressive output power. This amplifier can deliver up to 1000 watts of peak power, allowing it to drive subwoofers and speakers with ease. The two-channel setup provides flexibility for various configurations, making it suitable for mono, stereo, or multi-channel setups. This versatility caters to a wide range of users, whether they are looking to amplify their entire sound system or focus on enhancing bass performance.

Technology-wise, the APX1000.2 incorporates advanced Class D amplification, known for its efficiency and high power output. Class D amplifiers are designed to produce high levels of power while minimizing heat generation, which is essential for maintaining optimal performance during long listening sessions. This makes the APX1000.2 ideal for users who enjoy loud music without the risk of overheating.

In terms of sound quality, the APX1000.2 features a wide frequency response range and low distortion levels. This means that irrespective of the music genre, the amplifier reproduces audio accurately across the spectrum, from deep bass to crisp highs. Additionally, the built-in crossover allows users to tailor their sound preferences, ensuring that frequencies are appropriately distributed between speakers and subwoofers.

Installation flexibility is another key characteristic of the Clarion APX1000.2. It is designed with a compact form factor, making it easier to fit into various vehicle setups without compromising on space or performance. The amplifier also comes with a range of ports and connections, allowing for straightforward integration with existing audio systems.

Lastly, the APX1000.2 is equipped with various protection features, including thermal and overload protection, ensuring that the unit operates safely under demanding conditions. This attention to reliability contributes to the overall value of the amplifier, as users can trust it to perform consistently.

In conclusion, the Clarion APX1000.2 stands out as a powerful, efficient, and flexible amplifier suitable for any audio enthusiast looking to elevate their in-car listening experience. With its combination of cutting-edge technology, impressive power output, and superior sound quality, it is a worthy investment for anyone passionate about music on the road.