Clarion APX1000.2 manual Product Specs

Page 14

Problem

Distorted audio.

Solution

Gain is not set properly, or damaged speaker cones. Review Setting Gain; inspect each speaker cone for signs of damage (i.e. frozen cone, burning smell, etc.)

Problem

Audio lacks punch.

Solution

Speakers wired incorrectly, which causes cancellation of bass frequencies. Check polarity of wires from amplifier to each speaker as defined by the system design.

Problem

Amplifier fuse keeps blowing.

Solution

Incorrect wiring or short circuit. Review Installation and check all wiring connections.

Problem

Whining or ticking noise in the audio with engine on.

Solution

Amplifier is picking up alternator noise or radiated noise. Turn down input gain; move audio cables away from power wires. Check power and ground connections on amplifier; install an in-line noise filter on source unit’s power wire; check alternator and/or voltage regulator; test for weak battery or add water to battery

PRODUCT SPECS

 

APX1000.2

Frequency Response

20Hz ~ 20kHz

Signal Noise Ratio

>105db

THD

.05% all channels driven

Input Sensitivity Low Level

250mV ~ 2.5 V

Cont. Power Output

500w (250w x 2) @.05% THD

2-Ohm Stereo Output

250 x 2 @ .5% THD

Bridged Power

1000x 1 @ .5% THD

Dimensions

2.35”H x 8 “W x 18” L

Current Consumption at output @ max power

28A @ 235 Watts

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Introduction About the Manual and WarrantyTable of Contents Description Input Connections and Audio ControlsHigh-pass/Low-pass Filter Controls Connections for Power and Speakers Applications Channel Full-Range, Satellite, or Subwoofer Stereo System Mixed-Mode Satellite and Subwoofer System Wiring Precautions InstallationMounting Precautions Page Electrical connections for the APX1000.2 Setting the Bass Boost Setting the GainSetting the Crossover Troubleshooting Final System ChecksProduct Specs APX1000.2Page APX1000.0-10 Rev.1 04/00

APX1000.2 specifications

The Clarion APX1000.2 is a powerful and versatile amplifier designed for car audio enthusiasts seeking an upgrade to their sound system. With its robust performance and high-quality features, the APX1000.2 is built to deliver unprecedented audio experiences.

One of the standout features of the APX1000.2 is its impressive output power. This amplifier can deliver up to 1000 watts of peak power, allowing it to drive subwoofers and speakers with ease. The two-channel setup provides flexibility for various configurations, making it suitable for mono, stereo, or multi-channel setups. This versatility caters to a wide range of users, whether they are looking to amplify their entire sound system or focus on enhancing bass performance.

Technology-wise, the APX1000.2 incorporates advanced Class D amplification, known for its efficiency and high power output. Class D amplifiers are designed to produce high levels of power while minimizing heat generation, which is essential for maintaining optimal performance during long listening sessions. This makes the APX1000.2 ideal for users who enjoy loud music without the risk of overheating.

In terms of sound quality, the APX1000.2 features a wide frequency response range and low distortion levels. This means that irrespective of the music genre, the amplifier reproduces audio accurately across the spectrum, from deep bass to crisp highs. Additionally, the built-in crossover allows users to tailor their sound preferences, ensuring that frequencies are appropriately distributed between speakers and subwoofers.

Installation flexibility is another key characteristic of the Clarion APX1000.2. It is designed with a compact form factor, making it easier to fit into various vehicle setups without compromising on space or performance. The amplifier also comes with a range of ports and connections, allowing for straightforward integration with existing audio systems.

Lastly, the APX1000.2 is equipped with various protection features, including thermal and overload protection, ensuring that the unit operates safely under demanding conditions. This attention to reliability contributes to the overall value of the amplifier, as users can trust it to perform consistently.

In conclusion, the Clarion APX1000.2 stands out as a powerful, efficient, and flexible amplifier suitable for any audio enthusiast looking to elevate their in-car listening experience. With its combination of cutting-edge technology, impressive power output, and superior sound quality, it is a worthy investment for anyone passionate about music on the road.
Top Page Image Contents