Installation Instructions

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

KSRN25FRWH00, KSRF25FRBT00, KSRF25FRBT01, KSRN25FRSS01, 2308392 specifications

The KitchenAid appliance line has become synonymous with high-quality kitchen solutions, and models such as the KSRF25FRWH00, KSRF25FRBL01, KSRF25FRBT01, KSRN25FRWH00, and KSRT25CRSS00 are no exception. Each model is designed with advanced refrigeration technology, aiming to enhance food preservation and user convenience.

One standout feature across these models is the FreshSeal crisper drawers. These drawers are engineered to maintain optimal humidity levels, ensuring that fruits and vegetables stay fresh for longer periods. The adjustable temperature controls allow users to customize their storage environment based on the specific needs of different food items.

The exterior design of these refrigerators showcases a sleek finish, with the KSRF25FRWH00 and KSRF25FRWH00 both featuring a traditional white finish, while the KSRF25FRBL01 and KSRF25FRBT01 offer stylish black options, catering to various kitchen aesthetics. The KSRT25CRSS00 model stands out with its stainless steel exterior, providing a modern and professional look that complements contemporary kitchen settings.

The convenience of storage is greatly enhanced through the use of adjustable shelving. Each model features glass shelves that can be easily repositioned to accommodate taller items, maximizing usable space. Additionally, the integrated LED lighting system ensures that every corner of the refrigerator is illuminated, making it easy to find what you need.

Another crucial aspect of these KitchenAid models is their energy efficiency. Equipped with Energy Star certification, they are designed to consume less electricity while still delivering optimum performance. This not only helps reduce household energy bills but also minimizes environmental impact.

Moreover, the advanced cooling system implemented in these refrigerators provides consistent temperature control and quick recovery after door openings. This feature helps in maintaining food quality and safety, essential for any kitchen enthusiast.

Overall, the KitchenAid KSRF25FRWH00, KSRF25FRBL01, KSRF25FRBT01, KSRN25FRWH00, and KSRT25CRSS00 models exemplify what modern refrigeration should be. With their emphasis on food preservation, energy efficiency, and design versatility, they serve as a reliable choice for all kitchen needs. Whether you prioritize fresh produce, energy savings, or a stylish look, these refrigerators deliver on multiple fronts to enhance your culinary experience.