Troubleshooting, Changing the Light Bulbs

Changing the Light Bulbs

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. On some models, the dispenser light requires a heavy duty 10-watt bulb. All other lights require a 40-watt bulb. Replacement bulbs are available from your dealer.

1.Unplug refrigerator or disconnect power.

2.Remove light shield when applicable.

NOTE: To clean the light shield, wash it with warm water and liquid detergent. Rinse and dry the shield well.

3.Remove light bulb and replace with one of the same size, shape and wattage.

4.Replace light shield when applicable.

5.Plug in refrigerator or reconnect power.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Are controls on? Make sure the refrigerator controls are on. See “Using the Controls.”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature controls to coldest setting will not cool either compartment more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, doors are opened often, or if the doors have been left open.

The refrigerator is noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with an explanation.

■Buzzing - heard when the water valve opens to fill the ice maker

■Pulsating - fans/compressor adjusting to optimize performance

■Rattling - flow of refrigerant, water line, or from items placed on top of the refrigerator

■Sizzling/Gurgling - water dripping on the heater during defrost cycle

■Popping - contraction/expansion of inside walls, especially during initial cool-down

■Water running - may be heard when water melts during the defrost cycle and runs into the drain pan

■Creaking/Cracking - occurs as ice is being ejected from the ice maker mold.

The doors will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back in the correct position.

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Are the gaskets dirty or sticky? Clean gaskets with mild soap

and warm water.

The lights do not work

■Is a light bulb loose in the socket or burned out? See “Changing the Light Bulbs.”

■Is the dispenser light set to ON? The dispenser light will operate only when the levers are pressed. If you want the dispenser light to stay on continuously, set the dispenser light to ON, or NIGHT LIGHT or AUTO. See “Water and Ice Dispensers.”

KSRN25FRWH00, KSRF25FRBT00, KSRF25FRBT01, KSRN25FRSS01, 2308392 specifications

The KitchenAid appliance line has become synonymous with high-quality kitchen solutions, and models such as the KSRF25FRWH00, KSRF25FRBL01, KSRF25FRBT01, KSRN25FRWH00, and KSRT25CRSS00 are no exception. Each model is designed with advanced refrigeration technology, aiming to enhance food preservation and user convenience.

One standout feature across these models is the FreshSeal crisper drawers. These drawers are engineered to maintain optimal humidity levels, ensuring that fruits and vegetables stay fresh for longer periods. The adjustable temperature controls allow users to customize their storage environment based on the specific needs of different food items.

The exterior design of these refrigerators showcases a sleek finish, with the KSRF25FRWH00 and KSRF25FRWH00 both featuring a traditional white finish, while the KSRF25FRBL01 and KSRF25FRBT01 offer stylish black options, catering to various kitchen aesthetics. The KSRT25CRSS00 model stands out with its stainless steel exterior, providing a modern and professional look that complements contemporary kitchen settings.

The convenience of storage is greatly enhanced through the use of adjustable shelving. Each model features glass shelves that can be easily repositioned to accommodate taller items, maximizing usable space. Additionally, the integrated LED lighting system ensures that every corner of the refrigerator is illuminated, making it easy to find what you need.

Another crucial aspect of these KitchenAid models is their energy efficiency. Equipped with Energy Star certification, they are designed to consume less electricity while still delivering optimum performance. This not only helps reduce household energy bills but also minimizes environmental impact.

Moreover, the advanced cooling system implemented in these refrigerators provides consistent temperature control and quick recovery after door openings. This feature helps in maintaining food quality and safety, essential for any kitchen enthusiast.

Overall, the KitchenAid KSRF25FRWH00, KSRF25FRBL01, KSRF25FRBT01, KSRN25FRWH00, and KSRT25CRSS00 models exemplify what modern refrigeration should be. With their emphasis on food preservation, energy efficiency, and design versatility, they serve as a reliable choice for all kitchen needs. Whether you prioritize fresh produce, energy savings, or a stylish look, these refrigerators deliver on multiple fronts to enhance your culinary experience.