KitchenAid 12828154 manual Freezer Drawer, Replace Doors and Hinges, Remove Drawer, Replace Drawer

Page 8

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

4.Remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

5.Before removing the left-hand side door, disconnect the wire harness located on top of the top hinge by wedging a flat- blade screwdriver or your fingernail between the two sections. See Wire Harness graphic.

NOTE: The green, ground wire remains attached to the hinge.

6.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the left-hand side door from the bottom hinge pin.

7.Remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

Replace Doors and Hinges

1.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten the screws completely.

2.Replace the parts for the bottom hinge as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the refrigerator door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Align the door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws.

4.Reconnect the wire harness on top of the left-hand side refrigerator door.

5.Replace the top hinge covers.

Freezer Drawer

Graphics are included later in this section.

Remove Drawer

IMPORTANT: Two people may be required to complete this procedure.

1.Open the freezer drawer to full extension.

2.Remove all articles from baskets.

3.Pull the upper wire basket out to full extension and lift out to remove.

4.Lift lower basket straight up and out to remove.

5.Remove the basket cradles from the drawer rails. Push the snap attachments inward away from the drawer rails to unlatch the basket cradles. Lift the basket cradles off the drawer rails.

A

B

A. Cradle snap attachment

B. Basket cradle

6.Lift the top of the freezer drawer front to unhook supports from drawer rails. Lift drawer out.

Replace Drawer

IMPORTANT: Two people may be required to complete this procedure.

1.Pull both drawer rails out to full extension.

2.Locate the notches on the inside of each drawer rail. See Graphic 3-1.

3.While supporting the drawer front, hook the drawer supports into the notches on the inside of the drawer rails. Lower the drawer front into its final position. See Graphic 3-2.

4.Place the basket cradles back on the drawer rails. Align the snap attachments with the slots on the drawer rails, and press each snap toward the rail until it clicks.

5.With drawer rails pulled out to full extension, set the lower basket straight down into the basket cradles.

6.Slide the upper basket into the molded drawer rail. Make sure the rear of the basket hooks behind the drawer rail stop.

Final Steps

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug in refrigerator to a grounded 3 prong outlet.

2.Return all removable door parts to doors and food to refrigerator.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents BOTTOM-MOUNT Refrigerator Table of Contents Table DES MatièresRefrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerInstallation Instructions Clean Before UsingUnpack the Refrigerator Location RequirementsConnect the Water Supply Electrical RequirementsWater Supply Requirements Connect to Refrigerator StyleBase Grille RefrigeratorDoorsFreezer Drawer Replace Doors and HingesRemove Drawer Replace DrawerDrawer Removal & Replacement Adjustthe Door Water System PreparationStyle 1 Front leveling Style 2 Front and rear levelingUsingthe Controls Refrigerator USENormal Sounds EnsuringProper Air CirculationAdjusting Controls To Adjust Set Point TemperaturesAdditional Control Center Features Max Cool OptimIce FeatureWater Dispenser WaterFilter Status LightRefrigerator Features Water Filtration SystemIce Maker Refrigerator ShelvesCrisper and Crisper Cover Temperature-Controlled DrawerCrisper Humidity Control Freezer Baskets Freezer FeaturesUtilityor Egg Bin Door Features Refrigerator CareVacation and MovingCare Power InterruptionsChanging the Light Bulb Troubleshooting Ice maker is not producing ice or not enough ice Off-taste, odor or gray color in the iceWater dispenser will not operate properly Water flow from the dispenser decreases noticeablyTemperature is too warm Dispenser water is not cool enoughDivider between the two compartments is warm There is interior moisture buildupAssistance or Service AccessoriesWater Filter Certifications U.S.AProduct Data Sheets Application Guidelines/Water Supply ParametersKitchenaid Refrigerator Warranty ONE Year Limited WarrantySécurité DU Réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurInstructions D’INSTALLATION Exigences demplacementDéballage du réfrigérateur Enlèvement des matériaux d’emballageRaccordement dela canalisation deau Spécifications électriquesSpécifications de l’alimentation en eau Raccordement au réfrigérateur Grille de la base Portes du réfrigérateurRemplacement de les portes et des charnières Réinstallation du tiroir du congélateurTiroir du congélateur Enlèvement du tiroir du congélateurDémontage et réinstallation du tiroir Ajustementde la porte Préparation du système d’eauStyle 1 Nivellement avant Style 2 Nivellement avant et arrièreUtilisation DU Réfrigérateur SonsnormauxOuverture et fermeture des portes Pour s’assurer d’une circulation d’air AppropriéeUtilisation des commandes Commandes de températureAjustement des réglages de commande Désactivation/activation du réfrigérateurDoor Alarm avertisseur de la porte Holiday Mode mode vacancesTemp Alarm alarme de dépassement de température Alarme ALTémoin lumineux de létat du filtre à eau Distributeur d’eauSystème de filtration d’eau Tablettesdu réfrigérateur Caractéristiques DU RéfrigérateurMachineà glaçons Tiroir à température contrôlée Bacà légumesetcouvercleRéglage de l’humidité dansle bac à légumes Paniers de congélateur Caractéristiques DU CongélateurCasierutilitaire ou oeufrier Caractéristiques DE LA Porte Entretien DU RéfrigérateurRemplacement de l’ampoule d’éclairage Remplacement de lampoule du compartiment de réfrigérationRemplacement de lampoule du compartiment de congélation Pannes de courantDépannage Entretien avant les vacances ou lorsd’un déménagementDéménagement Les ampoules n’éclairent pasLe plat de dégivrage contient de l’eau Le moteur semble fonctionner excessivementLe réfrigérateur semble faire trop de bruit La machine à glaçons ne produit pas de glaçons ou pas assezLe distributeur d’eau ne fonctionne pas bien Le débit d’eau du distributeur diminue beaucoup’eau coule du distributeur ’eau du distributeur n’est pas assez froideAssistance OU Service AccessoiresFeuilles DE Données SUR LE Produit Système de filtration d’eau intérieurGarantie DU Réfrigérateur Kitchenaid Garantie Limitée DE UN AN12828154 All rights reserved

12828154 specifications

The KitchenAid 12828154 is a versatile and highly regarded kitchen appliance that is designed to make cooking and baking more efficient and enjoyable. Known for its robust construction and innovative features, this stand mixer is a favorite among both amateur cooks and professional chefs.

One of the standout features of the KitchenAid 12828154 is its powerful motor. With a high-performance motor capable of handling tough mixing tasks, this stand mixer can effortlessly knead dough, whip cream, and mix dense batters. The reliable motor ensures that the mixer operates smoothly, even on heavy-duty tasks, making it an essential tool for any kitchen.

This model comes equipped with a 5-quart stainless steel mixing bowl, which offers ample capacity for mixing large batches of dough or batter. The bowl is designed with a comfortable handle, allowing for easy lifting and pouring. Additionally, the stainless steel construction ensures durability and easy cleaning, making it a user-friendly option for everyday use.

Another key feature of the KitchenAid 12828154 is its 10-speed slide control. This allows for precise speed adjustments to suit various mixing needs, whether you're stirring, blending, or whipping. The flexibility in speed settings allows the user to achieve the desired consistency without overmixing or under-mixing, ensuring perfect results every time.

The mixer also comes with a variety of attachments, enhancing its versatility. These include the flat beater for mixing, the dough hook for kneading, and a wire whip for aerating mixtures. These attachments make it easy to tackle a range of recipes, from bread and pastries to cakes and frostings.

In terms of design, the KitchenAid 12828154 features a classic and sleek aesthetic that can complement any kitchen decor. Its sturdy construction and stylish finish make it a visually appealing as well as functional addition to kitchen spaces.

Moreover, the KitchenAid 12828154 is compatible with additional attachments, expanding its functionality even further. Users can easily add pasta makers, food grinders, and more, allowing for creativity and versatility in meal preparation.

Overall, the KitchenAid 12828154 is a powerful, reliable, and aesthetically pleasing stand mixer that embodies quality and performance. Its innovative features, coupled with its robust design, make it an ideal choice for anyone looking to enhance their culinary experience. Whether you're a novice or a seasoned chef, this mixer is sure to be a valuable asset in your kitchen.
Top Page Image Contents