Installation Instructions, PrepareLocation

INSTALLATION INSTRUCTIONS

PrepareLocation

■It is recommended that the vent system be installed before range hood is installed.

■If you are installing the optional backsplash, follow the instructions included with that product.

■Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

■Check that all installation parts have been removed from the shipping carton.

1.Disconnect power.

2.Determine which venting method to use: roof or wall exhaust.

3.Select a flat surface for assembling the range hood. Place covering over that surface.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

4.Using 2 or more people, lift range hood onto covered surface.

Range Hood Mounting Screws Installation

The range hood is attached to the wall with the wood support that is attached to the back of the range hood.

1.Determine and mark the centerline on the wall where the canopy range hood will be installed.

2.Select a mounting height “X” between a minimum of

24" (61 cm) from electric cooking surfaces or 30" (76.2 cm) from gas cooking surfaces, and a suggested maximum of 36" (91.4 cm), above the cooking surface and the bottom of the range hood and mark a horizontal reference line on the wall.

3.Remove the wood support from the back of the range hood by loosening the 2 screws from the inside. Locate and level the top of the wood support 15³⁄₈" (39.1 cm) above the marked horizontal line and centered on the vertical centerline.

Using 2 - 4 of the 6 x 80 mm screws, install wood support so that it is screwed into at least 2 vertical studs.

	15³⁄₈"
	(39 cm)	A
	"X"	B
	D	B
	D

A. Wood support

B. Bottom of range hood

C.Centerline

D.Dimension “X” = range hood mounting height

NOTE: The screws provided for mounting this range hood must be fastened into solid wood; do not fasten into sheet rock only.

Complete Preparation

1.Determine and make all necessary cuts in the wall or roof for the vent system. Install the vent system before installing the range hood. See the “Venting Requirements” section.

2.Determine the location where the power supply cable will be run through the wall.

3.Drill a 1¹⁄₄" (3.2 cm) hole at this location.

4.Pull enough power supply cable through the wall to allow for easy connection to the terminal box.

5.Install the 10" (25.4 cm) square x 10" (25.4 cm) round vent transition with damper to top or rear of the range hood (depending on your installation), using 4 - 3.5 x 9.5 mm screws. Remove the damper from the vent transition when mounting to the rear of the range hood.

NOTE: There is a 8¾" (22.2 cm) flat cover plate mounted on the rear panel of the range hood. It must cover the exhaust opening in the rear panel of the range hood for top venting or be removed and reinstalled to cover the exhaust opening in the top panel for rear venting.

W10331007B specifications

The KitchenAid W10331007B is a versatile and essential addition to any kitchen, designed to enhance both functionality and convenience. This product combines traditional craftsmanship with modern technology, making it an indispensable tool for culinary enthusiasts and home bakers alike.

One of the standout features of the W10331007B is its powerful motor, which ensures consistent performance whether you're mixing dough, whipping cream, or blending ingredients. The motor's high efficiency allows for quiet operation, making it suitable for early morning baking sessions or late-night meal preparations without disturbing the household.

This model is equipped with a range of attachments that expand its capabilities far beyond that of a standard mixer. From the flat beater for mixing batters to the dough hook for kneading, every attachment is designed to provide optimal results. Additionally, the inclusion of a wire whip makes it easy to achieve fluffy meringues or whipped cream, catering to a variety of recipes and culinary techniques.

The W10331007B boasts a user-friendly design with intuitive controls that allow for precise speed adjustments. Users can select from multiple speeds to suit their tasks, ensuring that delicate ingredients are treated with care while sturdier mixtures are thoroughly combined. This versatility empowers cooks to achieve professional-quality results with minimal effort.

Built with durability in mind, the KitchenAid W10331007B features a robust construction that stands up to frequent use. The stainless steel components not only ensure longevity but also make cleanup a breeze. The removable parts are dishwasher safe, allowing for quick maintenance and more time spent enjoying culinary creations rather than scrubbing dishes.

Another remarkable characteristic of the W10331007B is its iconic design. Offered in a variety of colors, it can seamlessly blend into any kitchen decor or serve as a stylish focal point on countertops. This aesthetic appeal, combined with its high functionality, makes it an excellent choice for both cooking aficionados and casual users.

In summary, the KitchenAid W10331007B embodies the perfect balance of form and function. Its powerful motor, versatile attachments, user-friendly controls, and durable construction make it a top choice for anyone looking to elevate their cooking or baking experience. Whether you're preparing a simple weekday dinner or an elaborate feast, this mixer is designed to meet your needs with ease and style.