KitchenAid W10331007B Venting Requirements, Cold weather installations, Makeup air

Page 5

Installation Dimensions

30" (76.2 cm), 36" (91.4 cm), or 48" (121.9 cm)

cabinet opening width

(If installed between cabinets)

Vent cover

(if used)

 

 

Min. cabinet

 

 

opening width

 

Canopy

 

 

 

A B

 

X

13" (33.0 cm)

 

Bottom of canopy

 

18" (45.7 cm) min.

to cooking surface

 

 

 

clearance upper

 

 

cabinet to countertop

 

 

36" (91.4 cm)

countertop height

A. For installations with canopy

B. For installations with optional

only:

duct cover:

78" (198.1 cm) minimum above

90" (228.6 cm) minimum

electric cooking surface

above electric cooking

84" (213.4 cm) minimum above

surface

gas cooking surface

96" (243.8 cm) minimum

 

above gas cooking surface

IMPORTANT:

Minimum distance “X”: 24" (61 cm) from electric cooking surfaces

Minimum distance “X”: 30" (76.2 cm) from gas cooking surfaces

Suggested maximum distance “X”: 36" (91.4 cm)

Venting Requirements

Vent system must terminate to the outdoors.

Do not terminate the vent system in an attic or other enclosed area.

Do not use 4" (10.2 cm) laundry-type wall caps.

Use metal vent only. Rigid metal vent is recommended. Plastic or metal foil vent is not recommended.

The length of vent system and number of elbows should be kept to a minimum to provide efficient performance.

For the most efficient and quiet operation:

Use no more than three 90° elbows.

Make sure there is a minimum of 24" (61.0 cm) of straight vent between the elbows if more than 1 elbow is used.

Do not install 2 elbows together.

Use clamps to seal all joints in the vent system.

The vent system must have a damper. If the roof or wall cap has a damper, do not use the damper supplied with the range hood.

Use caulking to seal exterior wall or roof opening around the cap.

The size of the vent should be uniform.

Cold weather installations

An additional back draft damper should be installed to minimize backward cold air flow and a thermal break should be installed to minimize conduction of outside temperatures as part of the vent system. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the vent system enters the heated portion of the house.

Makeup air

Local building codes may require the use of makeup air systems when using ventilation systems greater than specified CFM of air movement. The specified CFM varies from locale to locale.

Consult your HVAC professional for specific requirements in your area.

Venting Methods

Typical Internal Blower Motor System Venting Installations

A 10" (25.4 cm) round vent system is needed for installation (not included). The hood exhaust opening is 10" (25.4 cm) round.

NOTE: Flexible vent is not recommended. Flexible vent creates back pressure and air turbulence that greatly reduce performance.

Vent system can terminate either through the roof or wall.

Roof Venting

Wall Venting

Wall Venting

A

B

A

B

B

A

A. Roof cap

A. Wall cap

A. Wall cap

B. 10" (25.4 cm)

B. 10" (25.4 cm)

B. 10" (25.4 cm)

round vent

round vent

round vent

5

Image 5
Contents Commercial Style WALL-MOUNT Canopy Range Hood Range Hood Safety Table of ContentsTools needed Installation RequirementsTools and Parts Location Requirements Product DimensionsParts needed Parts suppliedMakeup air Cold weather installationsVenting Requirements Electrical Requirements Typical In-line Blower Motor System Venting InstallationsCalculating Vent System Length Example vent systemRange Hood Mounting Screws Installation Installation InstructionsPrepareLocation Complete PreparationPrepare the Internal Blower System InstallRange HoodInstall Range HoodInternal BlowerMotor Dual Blower Motor Assembly Install Range Hood Internal Blower MotorSingle Blower Motor Assembly Prepare the In-line Blower System InstallRange Hood In-Line ExternalType BlowerMotorPrepare for Mounting the In-Line Blower System Inlet Side Install In-line Blower SystemOutlet Side Electrical Connection Inside In-line Blower System MakeElectrical Connectionsfor In-Line BlowerMotor SystemMakeElectricalPower Supply Connection to Range Hood RangeHood Controls Complete InstallationandCheck OperationRange Hood USE RangeHoodLamps CleaningRange Hood Care SE112A Wiring DiagramAccessories Assistance or ServiceIntheU.S.A InCanadaThis limited warranty does not cover Kitchenaid Ventilation WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Outillageetpièces Exigences DinstallationExigences demplacement Vue arrière Dimensions d’installationExigences concernant lévacuation Installations pour régions à climat froidAir dappoint Pour un fonctionnement efficace et silencieuxCalcul de la longueur effective du circuit dévacuation SpécificationsélectriquesExemple de système de décharge Composant Longueur équivalentePréparationdelemplacement Instructions D’INSTALLATIONInstallation des vis de montage de la hotte Achever la préparationPréparation du système de ventilation interne Installationdela hotteInstallation du moteurduventilateurinterne Delahotte Ensemble à deux moteurs-ventilateurs Installer le moteur du ventilateur interne de la hotteEnsemble à un seul moteur-ventilateur Préparation du système de ventilation en ligne Installationdumoteurduventilateurenligne Externe dela hottePréparation du montage du système de ventilation en ligne Côté entrée Installation du système de ventilation en ligneCôté sortie La hotte étant montée voir la section Instructions Connexion de l’alimentationélectriqueà la Hotte Utilisation DE LA Hotte Achever linstallation et vérifierle FonctionnementCommandes delahotte decuisinière Nettoyage Entretien DE LA Hotte DE CuisinièreLampesdela hotte decuisinière MAR Schéma DE CâblageAuCanada Assistance OU ServiceAccessoires W10331007B Garantie DU Système DE Ventilation KitchenaidLa présente garantie limitée ne couvre pas

W10331007B specifications

The KitchenAid W10331007B is a versatile and essential addition to any kitchen, designed to enhance both functionality and convenience. This product combines traditional craftsmanship with modern technology, making it an indispensable tool for culinary enthusiasts and home bakers alike.

One of the standout features of the W10331007B is its powerful motor, which ensures consistent performance whether you're mixing dough, whipping cream, or blending ingredients. The motor's high efficiency allows for quiet operation, making it suitable for early morning baking sessions or late-night meal preparations without disturbing the household.

This model is equipped with a range of attachments that expand its capabilities far beyond that of a standard mixer. From the flat beater for mixing batters to the dough hook for kneading, every attachment is designed to provide optimal results. Additionally, the inclusion of a wire whip makes it easy to achieve fluffy meringues or whipped cream, catering to a variety of recipes and culinary techniques.

The W10331007B boasts a user-friendly design with intuitive controls that allow for precise speed adjustments. Users can select from multiple speeds to suit their tasks, ensuring that delicate ingredients are treated with care while sturdier mixtures are thoroughly combined. This versatility empowers cooks to achieve professional-quality results with minimal effort.

Built with durability in mind, the KitchenAid W10331007B features a robust construction that stands up to frequent use. The stainless steel components not only ensure longevity but also make cleanup a breeze. The removable parts are dishwasher safe, allowing for quick maintenance and more time spent enjoying culinary creations rather than scrubbing dishes.

Another remarkable characteristic of the W10331007B is its iconic design. Offered in a variety of colors, it can seamlessly blend into any kitchen decor or serve as a stylish focal point on countertops. This aesthetic appeal, combined with its high functionality, makes it an excellent choice for both cooking aficionados and casual users.

In summary, the KitchenAid W10331007B embodies the perfect balance of form and function. Its powerful motor, versatile attachments, user-friendly controls, and durable construction make it a top choice for anyone looking to elevate their cooking or baking experience. Whether you're preparing a simple weekday dinner or an elaborate feast, this mixer is designed to meet your needs with ease and style.