KitchenAid W10246119C installation instructions Bare Wire Torque Specifications, Wire Awg Torque

Page 13

Bare Wire Torque Specifications

Attaching terminal lugs to the terminal block - 20 lbs-in. (2.3 N-m)

Wire Awg

Torque

8 gauge copper

25 lbs-in. (2.8 N-m)

 

 

6 gauge aluminum

35 lbs-in. (4.0 N-m)

 

 

5.Use a hex or Phillips screwdriver to connect the bare (green) ground wire to the range with the ground-link screw and ground-link section. The ground wire must be attached first and must not contact any other terminal.

6.Use ³⁄₈" nut driver to connect the neutral (white) wire to the center terminal block post with one of the 10–32 hex nuts.

G

A

B

F

 

D

E

C

 

 

 

A. 10–32 hex nut

E. Neutral (white) wire

B. Line 2 (red)

F. Line 1 (black)

C. Bare (green) ground wire

G. Terminal lug

D.Ground-link screw

7.Connect line 2 (red) and line 1 (black) wires to the outer terminal block posts with 10-32 hex nuts.

8.Securely tighten hex nuts.

9.Replace terminal block access cover.

2.Attach terminal lugs to line 2 (red), bare (green) ground, and line 1 (black) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end through bottom of terminal lugs. Securely tighten setscrew to torque as shown in the following Bare Wire Torque Specifications chart.

A

B

CD E

A. Terminal lug

B.Setscrew

C.Line 2 (red) wire

D.Bare (green) ground wire

E.Line 1 (black) wire

Bare Wire Torque Specifications

Attaching terminal lugs to the terminal block - 20 lbs-in. (2.3 N-m)

Wire Awg

Torque

8 gauge copper

25 lbs-in. (2.8 N-m)

 

 

6 gauge aluminum

35 lbs-in. (4.0 N-m)

 

 

3.Use ³⁄₈" nut driver to connect the bare (green) ground wire to the center terminal block post with one of the 10–32 hex nuts.

3-wire connection: Direct Wire

Use this method only if local codes permit connecting ground conductor to neutral supply wire.

1.Pull the wires through the conduit on cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block.

A

G

B

 

 

C

 

 

D

F

E

 

 

 

A. Terminal block

D. Line 2

(red) wire

B. Ground-link screw

E. Bare (green) ground wire

C. Cord/conduit plate

F. Line 1

(black) wire

 

G. Metal ground strap

F

A

E

B

 

D

 

C

A. 10–32 hex nut

D. Bare (green) ground wire

B. Line 2 (red)

E. Line 1 (black)

C. Ground-link screw

F. Terminal lug

4.Connect line 2 (red) and line 1 (black) wires to the outer terminal block posts with 10-32 hex nuts.

5.Securely tighten hex nuts.

6.Replace terminal block access cover.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents W10246119C Table of Contents/Table des matièresTable DES Matières Range SafetyToolsandParts Installation RequirementsLocation Requirements Product Dimensions Freestanding Range Mobile Home Additional Installation RequirementsMobile home installations require Slide-in RangeElectrical Requirements U.S.A.Only Cabinet DimensionsElectrical Connection If connecting to a 3-wire system If connecting to a 4-wire systemLocal codes may permit the use of a UL listed, 3-wire Electrical Requirements -CanadaOnlyCountertopPreparation Measurefor Proper Height Installation InstructionsUnpack Range Slide-In RangesInstall Anti-TipBracket Adjust LevelingLegsFreestanding Ranges Direct Wire Power Supply CordStyle 1 Power supply cord strain relief Electrical Connection -U.S.A.OnlyStyle 2 Direct wire strain relief Tighten strain relief screw against the power supply cordDisconnect or Direct wire Circuit breaker Box Assemble a UL listed strain relief in the openingHex nut Green ground wire Ground-link screw Wire connection Power Supply CordMetal ground strap Discard Ground-link screw Line 2 red Line 1 blackWire Connection Direct Wire Direct Wire Installation Copper or Aluminum WireBare green ground wire Hex nutWire Awg Torque Bare Wire Torque SpecificationsGauge copper Lbs-in .8 N-m Gauge aluminum Lbs-in .0 N-m Verify Anti-Tip BracketLocation Complete InstallationLevel Range Movingthe RangeFor direct-wired ranges For power supply cord-connected rangesSécurité DE LA Cuisinière Exigences DinstallationOutillage et pièces Outillage nécessairePièces nécessaires Exigences demplacementPlanchette de remplissage arrière facultative Lors de l’utilisation d’un cordon d’alimentation électriqueCuisinière coulissante Dimensions du produit Cuisinière autoportanteCuisinière coulissante Dimensions du placardLargeur min. de louverture 30 76,2 cm Spécifications électriques Instructions DinstallationPréparationduplandetravail Déballage dela cuisinièreMesurespourunehauteurappropriée Installation dela brideantibasculementAjuster les pieds de nivellement Cuisinières coulissantesFixer le gabarit avec du ruban adhésif Vérification de lemplacement delabride AntibasculementRéglage delaplomb de lacuisinière Acheverl’installationSi la cuisinière ne fonctionne pas, contrôler ce qui suit Cuisinières alimentées par cordon dalimentation Déplacement delacuisinière

W10246119C specifications

The KitchenAid W10246119C is a versatile and essential kitchen appliance designed to enhance culinary experiences. This model focuses on providing efficiency and convenience for both amateur cooks and seasoned chefs.

One of its standout features is its powerful motor, which delivers optimum performance across a wide range of tasks. This motor is designed for durability and longevity, ensuring that users can rely on it for years to come. Coupled with a variety of attachments, the W10246119C allows users to tackle everything from mixing and blending to kneading and whipping, making it an invaluable addition to any kitchen.

The appliance typically incorporates several speed settings, allowing for precise control over mixing. This feature is crucial for achieving the perfect texture when preparing ingredients, be it for baking or cooking. Whether you need a slow stir for delicate mixtures or high-speed whipping for cream and egg whites, the W10246119C offers the flexibility required.

Technologically, the KitchenAid W10246119C often includes a user-friendly interface, featuring simple controls that make operation straightforward. The design is elegant, usually available in various colors to complement any kitchen décor. Additionally, its compact build ensures that it can fit comfortably on any countertop without taking up excessive space.

Another noteworthy characteristic is the appliance’s ease of cleaning. Many components are dishwasher-safe, simplifying the post-cooking cleanup process. The robust construction of the attachments also means they are built to withstand regular use, ensuring that the appliance remains a staple in the kitchen.

Furthermore, this model is often equipped with safety features, such as a locking mechanism, to prevent accidental operation. This is particularly beneficial when handling large quantities of ingredients or when using higher speeds.

In conclusion, the KitchenAid W10246119C combines power, versatility, and ease of use, making it an excellent tool for anyone looking to elevate their culinary skills. With its robust motor, multiple speed options, and range of attachments, it has become a trusted appliance in kitchens around the world, promising consistent results and effortless operation. Whether you are preparing a holiday feast or a simple weeknight dinner, the W10246119C stands ready to assist in creating delicious meals.
Top Page Image Contents