KitchenAid KHWG160, KHWL160 Installation Requirements, Tools and Parts, Location Requirements

Page 3

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the safety instructions provided with any tools listed here.

Tools needed:

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

■pencil

■measuring tape or ruler

■pliers

■Phillips screwdriver

■tube cutter

■1/4" or 7 mm open-end wrench

■adjustable wrench that opens to 1-1/2" (3.8 cm) minimum

■bucket or pan to catch water

Parts needed:

■screws or anchors for attaching mounting bracket to wall.

■1/4" O.D. copper tubing

■saddle valve kit or other plumbing parts needed to connect 1/4" tubing from faucet easy-connect fitting to water supply line. If a saddle valve is used, do not use a piercing type or 3/16" saddle valve, which reduces water flow and clogs more easily.

Saddle valve kit or other plumbing parts used must meet all local codes and ordinances.

Parts supplied:

Remove parts from packages. Check that all parts were included.

■faucet assembly

■water tank

■tank mounting bracket

■hose clamp

Location Requirements

Faucet requires a 1-3/8" (3.5 cm) diameter opening in sink or countertop. Faucet can be installed in place of sink spray hose. If faucet is not to be installed in sink spray hose opening, it is recommended that a qualified installer be contacted to drill hole through your type of sink or countertop. Thickness of sink or countertop hole must not exceed 1-3/4" (4.4 cm).

Cold water supply connection must be available. See “Water supply requirements” section.

Grounded electrical outlet is required. See “Electrical requirements” section. The outlet should be located within 42" (106.7 cm) of hot water dispenser tank.

Plumbing connections must comply with all sanitary and plumbing codes.

Water connections use easy-connect fittings which do not require sealing compounds to keep them from leaking.

Product dimensions and cabinet requirements

 

 

Faucet to be installed in a

 

Model Series

1-3/8" (3.5 cm) diameter

Tank must be

KHWG160 shown

sink or countertop cutout.

mounted vertically.

 

1-3/4" (4.4 cm) maximum

 

 

countertop or sink

 

 

thickness

cold water

 

 

supply line

 

 

 

 

11-1/8"

 

 

(28.3 cm)

 

 

model/serial

 

 

number label

42" (106.7 cm) maximum

 

 

from electrical outlet to

7-7/8"

6-7/8"

hot water dispenser tank.

(20.0 cm)

(17.5 cm)

 

Saddle valve or hard plumbed

 

connection to water supply line.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Series Record your model’s information8538287A1 HOT Water Dispenser Safety Table of ContentsInstallation Requirements Tools and PartsLocation Requirements Water Supply Requirements Installation InstructionsInstalling the Faucet Electrical RequirementsCm below the first line Installing the TankDispensing hot water Complete InstallationTemperature control Before first useCleaning the Faucet Screen Energy-saving tips and preparation for periods of nonuseFor short periods 2-30 days of nonuse Before Calling for Service Troubleshooting GuideProblem Check the Following Requesting Assistance or Service If you need assistance or service in U.S.AIf you need assistance or service in Canada Kitchenaid will not PAY for INSTANT-HOTwater dispenser WarrantyLength of Warranty Kitchenaid will PAY forEnregistrement des renseignements concernant votre modèle Modèle sérieSécurité DU Distributeur D’EAU Chaude Instructions D’INSTALLATIONDemande D’ASSISTANCE OU DE Service Table DES MatièresExigences D’INSTALLATION Emplacement d’installationOutillage et pièces Spécifications électriques Instructions D’INSTALLATIONInstallation du robinet de puisage Méthode recommandée de mise à la terreInstallation du chauffe-eau Réglage de la température Achever l’installationUtilisation DU Avant la première utilisation’EAU Chaude Nettoyage du tamis de filtration du robinetPour une brève période d’inutilisation 2 à 30 jours Avant de demander l’intervention d’un technicien Guide de dépannageProblème Contrôler CE QUI Suit Demande D’ASSISTANCE OU DE Service Si vous avez besoin d’assistance ou de service aux É.-USi vous avez besoin d’assistance ou de service au Canada Kitchenaid NE Paiera PAS Pour Garantie du distributeur d’eau INSTANT-HOTDurée DE LA Garantie Kitchenaid Paiera Pour

KHWC160, KHWL160, KHWG160 specifications

The KitchenAid KHWG160, KHWL160, and KHWC160 represent an impressive line of kitchen appliances designed to enhance culinary experiences for both amateur cooks and professional chefs alike. Each model showcases KitchenAid's commitment to quality, innovation, and style.

The KHWG160 is a powerful stand mixer known for its robust performance and versatile capabilities. Equipped with a 300-watt motor, this mixer offers ten speeds, allowing users to tackle a variety of tasks—from mixing batter to kneading dough with ease. One standout feature of the KHWG160 is its unique planetary mixing action, which ensures that ingredients are mixed thoroughly and evenly by moving in multiple directions. This results in a consistent mixture every time, significantly reducing prep time and enhancing the quality of baked goods.

In contrast, the KHWL160 is a sleek blender that combines cutting-edge technology with an elegant design. It boasts a high-performance motor that provides up to 15 blending speeds, allowing for precision control when creating smoothies, soups, or sauces. This model is also equipped with a unique ice-crushing feature that can handle frozen ingredients effortlessly, making it ideal for tropical drinks or frozen desserts. Additionally, the KHWL160's stainless steel blades are designed for durability and efficiency, ensuring that they stay sharp and effective over time.

Finally, the KHWC160 is an innovative food processor that streamlines meal prep with its multifunctional design. With a 750-watt motor and multiple attachments, this food processor can slice, shred, chop, and puree ingredients to suit any recipe. The large capacity bowl allows for handling larger quantities of food, making it a fantastic addition for families or those who love to entertain. The KHWC160 also includes a safety lock mechanism, ensuring that the appliance operates safely during use.

All three models are a testament to KitchenAid's dedication to blending functionality with aesthetic appeal. They feature a classic design that complements any kitchen décor while being built from high-quality materials that ensure durability. With their powerful motors, innovative features, and user-friendly interfaces, the KitchenAid KHWG160, KHWL160, and KHWC160 are perfect companions for elevating your culinary skills and delivering delicious results every time.
Top Page Image Contents