KitchenAid KHWG160, KHWL160, KHWC160 Complete Installation, Before first use, Temperature control

Page 6

Complete Installation

IMPORTANT: The hot water dispenser can be damaged if the following steps are not followed.

NOTE: Do not plug power supply cord into outlet.

1.Turn Temperature Control counterclockwise to “Off” position.

2.Push down and turn the faucet cap clockwise to open faucet. Hold cap open until water flows from the faucet (about 1 to 1-1/2 minutes).

faucet cap

Model Series

KHWG160 shown

3.Release faucet cap. Check for leaks.

NOTE: Make sure the Temperature Control is in the “Off” position before plugging hot water dispenser into power supply. If tank is empty and thermostat is in an “On” position when the power supply cord is connected, the heater will overheat causing an unpleasant taste, black specks in the water, and permanent damage to the hot water dispenser.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Once water is flowing from faucet, the water heating tank has been filled with water. Plug power supply cord into grounded 3 prong outlet.

5.Turn Temperature Control clockwise to highest position.

Water in tank will reach maximum temperature in about 15 minutes.

NOTES:

•When water is heating, you may hear gurgling noises coming from the tank.

•There may also be a small amount of spitting or hot water flow from the faucet. This is normal for the initial heat-up of the dispenser.

•The Temperature Control controls tank heater, not water delivery. Rotate Temperature Control clockwise to make water hotter, counterclockwise to lower water temperature.

•Turn Temperature Control to lower temperature setting if you notice vapor or hear boiling noise.

HOT WATER DISPENSER USE

Before first use:

After the tank has been in operation for a minimum of 15 minutes, push and turn the faucet cap and allow water to flow for about 1 minute. Release the faucet cap and allow the water to reheat for about 15 minutes prior to use.

Check that all installation steps were completed.

The Whisper Quiet® System helps to maintain a quiet home environment during the operation of the hot water dispenser.

Temperature control

The water temperature is thermostatically controlled. It can be adjusted from “Off” to about 190°F (88°C).

To raise or lower the temperature, turn the Temperature Control. The “Max” setting is recommended for best performance. However, under certain conditions, it is possible for the water to boil when the Temperature Control is set at “Max.” If you see any vapor or hear boiling, turn Temperature Control to lower temperature as necessary.

Dispensing hot water

Push down and turn the faucet cap clockwise and hold until desired amount of hot water is obtained. There is a small delay from the time the faucet cap is turned until hot water is dispensed. This delay is normal.

faucet cap

Model Series

KHWG160 shown

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Series Record your model’s information8538287A1 Table of Contents HOT Water Dispenser SafetyInstallation Requirements Tools and PartsLocation Requirements Electrical Requirements Installation InstructionsInstalling the Faucet Water Supply RequirementsInstalling the Tank Cm below the first lineBefore first use Complete InstallationTemperature control Dispensing hot waterCleaning the Faucet Screen Energy-saving tips and preparation for periods of nonuseFor short periods 2-30 days of nonuse Before Calling for Service Troubleshooting GuideProblem Check the Following Requesting Assistance or Service If you need assistance or service in U.S.AIf you need assistance or service in Canada Kitchenaid will PAY for INSTANT-HOTwater dispenser WarrantyLength of Warranty Kitchenaid will not PAY forModèle série Enregistrement des renseignements concernant votre modèleTable DES Matières Instructions D’INSTALLATIONDemande D’ASSISTANCE OU DE Service Sécurité DU Distributeur D’EAU ChaudeExigences D’INSTALLATION Emplacement d’installationOutillage et pièces Méthode recommandée de mise à la terre Instructions D’INSTALLATIONInstallation du robinet de puisage Spécifications électriquesInstallation du chauffe-eau Avant la première utilisation Achever l’installationUtilisation DU Réglage de la température’EAU Chaude Nettoyage du tamis de filtration du robinetPour une brève période d’inutilisation 2 à 30 jours Avant de demander l’intervention d’un technicien Guide de dépannageProblème Contrôler CE QUI Suit Demande D’ASSISTANCE OU DE Service Si vous avez besoin d’assistance ou de service aux É.-USi vous avez besoin d’assistance ou de service au Canada Kitchenaid Paiera Pour Garantie du distributeur d’eau INSTANT-HOTDurée DE LA Garantie Kitchenaid NE Paiera PAS Pour

KHWC160, KHWL160, KHWG160 specifications

The KitchenAid KHWG160, KHWL160, and KHWC160 represent an impressive line of kitchen appliances designed to enhance culinary experiences for both amateur cooks and professional chefs alike. Each model showcases KitchenAid's commitment to quality, innovation, and style.

The KHWG160 is a powerful stand mixer known for its robust performance and versatile capabilities. Equipped with a 300-watt motor, this mixer offers ten speeds, allowing users to tackle a variety of tasks—from mixing batter to kneading dough with ease. One standout feature of the KHWG160 is its unique planetary mixing action, which ensures that ingredients are mixed thoroughly and evenly by moving in multiple directions. This results in a consistent mixture every time, significantly reducing prep time and enhancing the quality of baked goods.

In contrast, the KHWL160 is a sleek blender that combines cutting-edge technology with an elegant design. It boasts a high-performance motor that provides up to 15 blending speeds, allowing for precision control when creating smoothies, soups, or sauces. This model is also equipped with a unique ice-crushing feature that can handle frozen ingredients effortlessly, making it ideal for tropical drinks or frozen desserts. Additionally, the KHWL160's stainless steel blades are designed for durability and efficiency, ensuring that they stay sharp and effective over time.

Finally, the KHWC160 is an innovative food processor that streamlines meal prep with its multifunctional design. With a 750-watt motor and multiple attachments, this food processor can slice, shred, chop, and puree ingredients to suit any recipe. The large capacity bowl allows for handling larger quantities of food, making it a fantastic addition for families or those who love to entertain. The KHWC160 also includes a safety lock mechanism, ensuring that the appliance operates safely during use.

All three models are a testament to KitchenAid's dedication to blending functionality with aesthetic appeal. They feature a classic design that complements any kitchen décor while being built from high-quality materials that ensure durability. With their powerful motors, innovative features, and user-friendly interfaces, the KitchenAid KHWG160, KHWL160, and KHWC160 are perfect companions for elevating your culinary skills and delivering delicious results every time.
Top Page Image Contents