Kambrook KFP95 manual Using the Slicing Grating Discs, Correct Placement of the Processor Lid

Using the Slicing/

Grating Discs

a. Select the desired slicing/grating disc and assemble into the disc holder. (See Fig. 4). To fit the stainless steel disc onto disc holder, fit left side of disc (when writing is towards you), with locating tab into holder, then push right side down firmly until it locks into place. (See Fig.

5). Fit the end without the push up marking in first. Then push the “push up” side down firmly until it locks into place.

Locate Tab

Fig. 4

Fig. 5

b. To remove disc, hold disc away and place thumbs underneath disc at top of disc marked “push up” and push out. (See Fig. 6). The disc may be tight for the first few times.

Fig. 6

WARNING: All blades must be handled carefully as they are sharp!

Correct Placement of the Processor Lid

Fig. 7

Place the lid on top of the bowl, align the indicator line on the lid with the circleon the bowl.

Turn the lid clockwise – moving the ‘lid locking tab’ into the slot near the top of the motor unit (See Fig. 7) - until the indicator line on the lid is aligned with the circleon the top of the bowl. A “click” sound will be heard, to indicate it is correctly fitted.

11