Location Requirements

■To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The unit may be closed-in on the top and three sides, but the installation should allow the ice maker to be pulled forward for servicing if necessary.

■Installation of the ice maker requires a cold water supply inlet of ¹⁄₄" (6.35 mm) OD soft copper tubing with a shutoff valve and either a gravity-drain system or condensate pump to carry the water to an existing drain.

■Choose a well ventilated area with temperatures above 55°F (13°C) and below 100°F (38°C). Best results are obtained between 70°F (21°C) and 90°F (32°C).

■This unit must be installed in an area protected from the elements, such as wind, rain, water spray, or drip.

■When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown.

NOTE:

■Be sure the power supply cord is not pinched between the ice maker and the cabinet.

■Be sure the water supply line is not pinched between the ice maker and the cabinet.

■Be sure the drain line (on some models) is not pinched between the ice maker and the cabinet.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your ice maker into its final location, it is important to make sure you have the proper electrical connection:

A 115 Volt, 60 Hz., AC only 15-amp electrical supply, properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.

It is recommended that a separate circuit, serving only your ice maker, be provided. Use a receptacle which cannot be turned off by a switch or pull chain.

Recommended grounding method

34"

(86.4 cm)

Min.

34¹⁄₂"

(87.6 cm)

Max.

11¹⁄₂" (29.2 cm)

3¹⁄₂" 9"

(8.9 cm)(22.9 cm)

28¹⁄₂"

(72.4 cm)

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3 prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility of the customer to have a properly grounded, 3 prong wall receptacle installed by a qualified electrician.

Water Supply Requirements

24"

(60.1 cm)

15"

(38.1 cm)

A. Recommended location for electrical and plumbing fixtures

B. Floor level

■You should choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If needed, you can adjust the height of the ice maker by changing the height of the leveling legs. See “Leveling.”

A cold water supply with water pressure of between 30 and

120 psi (207 and 827 kPa) is required to operate the ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the ice maker needs to be between 30 and 120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). The reverse osmosis system must provide 1 gal. (3.79L) of water per hour to the ice maker for proper ice maker operation.

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

2313684A specifications

The KitchenAid 2313684A is a versatile and powerful addition to any kitchen, designed to cater to the needs of home cooks and professional chefs alike. This model stands out with its exceptional design and array of features that enhance the cooking experience.

One of the main highlights of the KitchenAid 2313684A is its robust construction. Built to last, it combines a stainless steel body with a powerful motor that ensures durability and resilience. The elegant design not only makes it aesthetically pleasing but also easy to clean, maintaining its polished look after numerous culinary adventures.

The 2313684A is equipped with a variety of attachments, enabling users to perform multiple functions in the kitchen. From mixing and kneading to whipping and pounding, this device eliminates the need for various gadgets, as it can handle a range of tasks with ease. This feature is especially useful for those who wish to streamline their kitchen tools without sacrificing functionality.

Another significant feature is the variable speed control. Users can choose from multiple speeds, allowing for precise mixing according to individual recipes and preferences. This flexibility is essential when dealing with different ingredients, ensuring perfect results whether making delicate meringues or robust bread doughs.

The KitchenAid 2313684A also embraces modern technology with its ergonomic design, which provides a comfortable grip and usability. The bowl-lift mechanism allows for easy access to ingredients and the ability to work with larger batches, making it a practical choice for larger households or those who like to entertain.

Safety is integral to KitchenAid's philosophy, and the 2313684A incorporates various safety measures, including a locking mechanism during operation. This feature provides peace of mind, allowing users to focus on their culinary creations without worrying about accidental mishaps.

Moreover, KitchenAid offers a range of color options for the 2313684A, allowing customers to choose a model that matches their kitchen decor and personal style. This attention to detail ensures that the appliance not only performs well but also complements the overall aesthetic of the kitchen.

In conclusion, the KitchenAid 2313684A combines power, versatility, and style, making it an indispensable tool for any cooking enthusiast. Its high-quality construction, numerous attachments, variable speed options, and safety features set it apart in the competitive market of kitchen appliances, ensuring that it meets the demands of both casual cooks and seasoned professionals. Whether you’re baking a cake, whipping cream, or kneading dough, the KitchenAid 2313684A is designed to make the process efficient and enjoyable.