Install the Drain Hose

Option 2: Top attachment

1.If the top attaching brackets are used, open the top drawer slightly.

2.Screw the top attaching brackets to the underside of the counter with two #8 Phillips head screws.

IMPORTANT: The top attaching brackets can accommodate a maximum 3/4" (19 mm) vertical gap.

top attaching bracket

3.Close the top drawer.

Option 1: Sink drain waste tee connection

1.Route the drain hoses as shown and press the hoses into the drain hose support.

2.Decide if the drain hoses need to be trimmed. If they do, trim them.

wire clip

3.Slip a wire clip over each drain

hose. Push the hoses into the drain hose connector firmly, 5 clicks.

	4. Position the wire clips between	wire clip
	the two positioning ribs on the	wire clip
	the two positioning ribs on the	drain hose
	drain hose connector.	connector

5.Attach the drain hose connector to the waste tee using the supplied hose clamp.

6.Attach the drain hose support bracket to the cabinet with a #8 Phillips head screw at the height shown below.

NOTE: The drain hose connector must not support the weight of excess hose length. Keep hoses as fully extended as possible.

drain hose support

Option 2: Garbage disposal connection

1.Route the drain hoses as shown and press the hoses into the drain hose support.

2.Decide if the drain hoses need to be trimmed. If they do, trim them.

3.	Slip a wire clip over each drain	wire clip
3.	Slip a wire clip over each drain
	hose. Push the hoses into the
	drain hose connector firmly,
	5 clicks.
4.	Position the wire clips between	wire clip
	the two positioning ribs on the	wire clip
	the two positioning ribs on the	drain hose
	drain hose connector.	connector

5.Attach the drain hose connector to the garbage disposal using the supplied hose clamp.

6.Attach the drain hose support bracket to the cabinet with a #8 Phillips head screw at the height shown below.

NOTE: The drain hose connector must not support the weight of excess hose length. Keep hoses as fully extended as possible.

drain hose support

			6" (15.2 cm)
			minimum
-321/4"	82cm)		garbage
-321/4"	82cm)		disposal
			disposal
– –		valve
1/2"-27	cm(70	valve	waste
1/2"-27	cm(70

			water supply
			8" (20.3 cm) min. bend
			radius from valve

	waste tee
	waste
27-1/2" – 32-1/4"	water supply
(70 cm – 82 cm)

Option 3: Air break connection

1.Route the drain hoses as shown.

2.Decide if the drain hoses need to be trimmed. If they do, trim them.

3.	Slip a wire clip over each drain	wire clip
3.	Slip a wire clip over each drain
	hose. Push the hoses into the
	drain hose connector firmly,
	5 clicks.
4.	Position the wire clips between	wire clip
	the two positioning ribs on the	wire clip
	the two positioning ribs on the	drain hose
	drain hose connector.	connector

KUDD03DT specifications

The KitchenAid KUDD03DT is a versatile and stylish dishwasher that stands out for its exceptional performance and innovative design. This model is engineered with a range of features and technologies that enhance efficiency and cleaning power, making it a popular choice for homeowners looking to upgrade their kitchen appliances.

One of the standout features of the KUDD03DT is its powerful cleaning system, which utilizes a multi-dimensional wash system to ensure that every dish, regardless of size or shape, comes out sparkling clean. The dishwasher is equipped with rotating wash arms that provide thorough coverage, directing water to every corner of the interior. This feature is especially beneficial for larger pots and pans, which often require more meticulous attention during the washing process.

Energy efficiency is another significant characteristic of the KitchenAid KUDD03DT. It is designed to consume less water and energy than traditional dishwashers, making it an environmentally friendly option. The unit is ENERGY STAR certified, providing reassurance that it meets stringent energy efficiency standards. Homeowners can save on utility bills while also contributing to a sustainable lifestyle.

The KUDD03DT also boasts a spacious interior, with adjustable racks and multiple loading options. This flexibility allows users to customize the interior space to fit their specific needs, accommodating everything from delicate glassware to heavy cookware. The upper rack features a dedicated stemware holder, which securely supports wine glasses and prevents them from tipping over during the wash cycle.

In terms of technology, the KUDD03DT includes a soil sensor that detects the level of dirtiness of the dishes and adjusts the wash cycle accordingly. This smart technology ensures optimal cleaning while conserving water and energy. Additionally, the dishwasher features a quiet operation, with sound-dampening materials that minimize noise, helping to maintain a peaceful home environment even during wash cycles.

Overall, the KitchenAid KUDD03DT combines practicality and sophistication. With its robust cleaning capabilities, energy-efficient design, and thoughtful features, it is an excellent investment for any kitchen. Whether entertaining guests or managing everyday meals, this dishwasher excels in performance, reliability, and user-friendliness, making it a top choice for discerning homeowners.