KitchenAid KUDD03DT installation instructions Water Supply Requirements, Electrical Requirements

Page 4

Cabinet dimensions/requirements

moisture

protection tape

4"

(10 cm)

32-5/16"– 34-5/8"

(82.0 cm – 88.0 cm)

Utility hole:

1-1/2" (3.8 cm) dia. hole, either side – immediately adjacent to corner.

22-7/8"

(58.0 cm)

23-5/8"* (60.0 cm)

Water Supply Requirements

For dishwasher:

Hot water line with 4.3-145 psi (30-1000 kPa) water pressure.

120°F (48.8°C) water at dishwasher.

An easily accessible valve with 3/8" compression fitting must be installed in the hot water supply line.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

typicalcountertop installation

 

moisture

tape

protection tape

1/2" (12.7 mm) from

 

front of countertop

 

The 3 prong grounded outlet must be installed within 6" (15.2 cm) to 18" (45.7 cm) of the cabinet side wall.

NOTE: The power outlet must be accessible after installation.

It is recommended that wood cabinetry surrounding the dishwasher be sealed with an oil-based paint or moisture-proof polyurethane to prevent possible damage from humidity.

The utility hole must be located as shown. If the hole is not located as shown, the hoses will prevent the dishwasher from being pushed back all the way into the cavity. Make sure the edges of the utility hole are smooth or covered. If the utility hole is through a metal cabinet, the hole must be protected with the edge protector provided.

*IMPORTANT: Custom wood door panels, if used, may be wider than the dishwasher to match surrounding cabinets. The 23-5/8" (60.0 cm) must be increased so that there is a 1/4" (6.4 mm) clearance between the cabinet side and panel edge.

For corner installation, there must be a 1/2" (12.7 mm) space between the adjacent cabinet doors (i.e. door knobs) and open dishwasher drawer.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-ground conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dishwasher.

SAVE THESE INSTRUCTIONS

A 120-volt, 60 Hz, AC-only, 15 amp fused electrical supply is required. (Circuit breaker or time-delay fuse is recommended.) It is recommended that a separate circuit serving only this appliance be provided.

4

Image 4
Contents Installation Instructions Drawer Dishwasher Drawer Dishwasher Safety Table of ContentsInstallation Requirements Product dimensionsTools and Parts Location RequirementsCabinet dimensions/requirements Water Supply RequirementsElectrical Requirements For a grounded, cord-connected dishwasherInstallation Instructions Option 1 Power Supply Cord MethodPrepare Cabinet Opening Electrical ConnectionOption 2 Direct Wiring Method Remove factory-installed power cordRemove the house wiring knockout If Installing Flexible Trim Pieces Install DishwasherChoose attachment option Option 1 Side attachmentInstall the Drain Hose Option 2 Top attachmentOption 1 Sink drain waste tee connection Option 2 Garbage disposal connectionOption 1 Install standard front panels Install Drawer Front Panels and Toe PanelConnect to Water Supply Option 1 Install standard toe panel Option 2 Install custom front panels Custom front panel dimensionsOption 2 Install custom toe panel Custom toe panel dimensionsComplete Installation If dishwasher does not operate, check the followingPage Instructions d’installation Lave-vaisselle tiroir Sécurité DU LAVE-VAISSELLE Tiroir Table des matièresEmplacement d’installation Exigences DinstallationOutillage et pièces Dimensions/exigences du placard Spécifications de l’alimentation en eauSpécifications électriques Pour un lave-vaisselle branché en permanenceInstructions Dinstallation Préparation de la cavité d’installationMéthode recommandée de liaison à la terre Raccordement électriqueEnlever le cordon d’alimentation installé à l’usine Option 2 Méthode par câblage directAvertissement Cas de linstallation de moulures Extrudées flexibles Installation du lave-vaisselleOptions de fixation Option 1 Fixation latéraleOption 2 Fixation supérieure Option 2 Connexion sur le broyeur à déchetsOption 1 Installation des panneaux avant standard Option 3 Raccordement au brise-siphonOption 1 Installation de la planche de plinthe standard Option 2 Installation de panneaux avant personnalisés Dimensions des panneaux avant personnalisésOption 2 Installation une de plinthe personnalisée Dimensions de la planche de plinthe personnaliséeAchever l’installation

KUDD03DT specifications

The KitchenAid KUDD03DT is a versatile and stylish dishwasher that stands out for its exceptional performance and innovative design. This model is engineered with a range of features and technologies that enhance efficiency and cleaning power, making it a popular choice for homeowners looking to upgrade their kitchen appliances.

One of the standout features of the KUDD03DT is its powerful cleaning system, which utilizes a multi-dimensional wash system to ensure that every dish, regardless of size or shape, comes out sparkling clean. The dishwasher is equipped with rotating wash arms that provide thorough coverage, directing water to every corner of the interior. This feature is especially beneficial for larger pots and pans, which often require more meticulous attention during the washing process.

Energy efficiency is another significant characteristic of the KitchenAid KUDD03DT. It is designed to consume less water and energy than traditional dishwashers, making it an environmentally friendly option. The unit is ENERGY STAR certified, providing reassurance that it meets stringent energy efficiency standards. Homeowners can save on utility bills while also contributing to a sustainable lifestyle.

The KUDD03DT also boasts a spacious interior, with adjustable racks and multiple loading options. This flexibility allows users to customize the interior space to fit their specific needs, accommodating everything from delicate glassware to heavy cookware. The upper rack features a dedicated stemware holder, which securely supports wine glasses and prevents them from tipping over during the wash cycle.

In terms of technology, the KUDD03DT includes a soil sensor that detects the level of dirtiness of the dishes and adjusts the wash cycle accordingly. This smart technology ensures optimal cleaning while conserving water and energy. Additionally, the dishwasher features a quiet operation, with sound-dampening materials that minimize noise, helping to maintain a peaceful home environment even during wash cycles.

Overall, the KitchenAid KUDD03DT combines practicality and sophistication. With its robust cleaning capabilities, energy-efficient design, and thoughtful features, it is an excellent investment for any kitchen. Whether entertaining guests or managing everyday meals, this dishwasher excels in performance, reliability, and user-friendliness, making it a top choice for discerning homeowners.