KitchenAid KUDD03DT If Installing Flexible Trim Pieces, Install Dishwasher

Page 8

17.Use the side cutting pliers to cut the cable tie securing the hoses and power supply cord to the back of the dishwasher.

back of

dishwasher

22.As the dishwasher is being pushed into the opening, slowly pull the inlet hose and drain hoses through the utility hole. Let the house wiring gather behind the dishwasher.

23.Remove the strap from upper drawer.

cable tie

18.Completely remove the power supply cord and save it, in case a power cord installation is needed in the future.

If Installing Flexible Trim Pieces

If the cabinet opening is 24" wide x 34-1/2" high (61.0 cm x

87.6cm), flexible trim pieces can be attached along the top and sides of the dishwasher. Top and side trim pieces are different lengths.

1.Open the drawers to expose the chassis trim.

2.Center the flexible trim pieces.

WARNING

Tip Over Hazard

Do not use dishwasher drawer until inside cabinet opening.

Doing so can result in serious injury or cuts.

WARNING

Excessive Weight Hazard

Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury.

19.Place cardboard or other protective covering on the floor in front of cabinet opening. Place the dishwasher on covering.

20.Begin to route the hoses through the utility hole in the cabinet.

IMPORTANT: Push against the outside edges of drawers as shown. Do not push against the center of the drawers.

21.Push dishwasher partway into the opening.

 

side trim

 

 

piece

 

 

chassis

 

 

trim

 

 

edge

 

 

lip

 

side trim

top trim

 

piece

 

piece

side trim

 

 

 

piece

 

open drawer

chassis trim

 

 

 

 

edge

3.If using the optional top attaching brackets, place the trim pieces under the attaching brackets.

4.Remove trim pieces backing paper to expose the adhesive.

5.Place the trim pieces on the trim and press.

6.Finish pushing dishwasher into opening.

Install Dishwasher

1.Leave protective cover on floor.

2.Open the bottom drawer.

3.Press in the right-hand runner clip and push it back about 6" (15.2 cm). Repeat with the left-hand runner clip.

NOTE: When removing the drawer there is limited range of movement due to the attached water hoses.

runner clip

4.Lift the right edge of the drawer off its runner. Slide that runner back into the dishwasher.

5.Lift the drawer completely off the left-hand runner.

8

Image 8
Contents Installation Instructions Drawer Dishwasher Drawer Dishwasher Safety Table of ContentsInstallation Requirements Product dimensionsTools and Parts Location RequirementsCabinet dimensions/requirements Water Supply RequirementsElectrical Requirements For a grounded, cord-connected dishwasherInstallation Instructions Option 1 Power Supply Cord MethodPrepare Cabinet Opening Electrical ConnectionOption 2 Direct Wiring Method Remove factory-installed power cordRemove the house wiring knockout If Installing Flexible Trim Pieces Install DishwasherChoose attachment option Option 1 Side attachmentInstall the Drain Hose Option 2 Top attachmentOption 1 Sink drain waste tee connection Option 2 Garbage disposal connectionConnect to Water Supply Install Drawer Front Panels and Toe PanelOption 1 Install standard front panels Option 1 Install standard toe panel Option 2 Install custom front panels Custom front panel dimensionsOption 2 Install custom toe panel Custom toe panel dimensionsComplete Installation If dishwasher does not operate, check the followingPage Instructions d’installation Lave-vaisselle tiroir Sécurité DU LAVE-VAISSELLE Tiroir Table des matièresOutillage et pièces Exigences DinstallationEmplacement d’installation Dimensions/exigences du placard Spécifications de l’alimentation en eauSpécifications électriques Pour un lave-vaisselle branché en permanenceInstructions Dinstallation Préparation de la cavité d’installationMéthode recommandée de liaison à la terre Raccordement électriqueEnlever le cordon d’alimentation installé à l’usine Option 2 Méthode par câblage directAvertissement Cas de linstallation de moulures Extrudées flexibles Installation du lave-vaisselleOptions de fixation Option 1 Fixation latéraleOption 2 Fixation supérieure Option 2 Connexion sur le broyeur à déchetsOption 1 Installation des panneaux avant standard Option 3 Raccordement au brise-siphonOption 1 Installation de la planche de plinthe standard Option 2 Installation de panneaux avant personnalisés Dimensions des panneaux avant personnalisésOption 2 Installation une de plinthe personnalisée Dimensions de la planche de plinthe personnaliséeAchever l’installation

KUDD03DT specifications

The KitchenAid KUDD03DT is a versatile and stylish dishwasher that stands out for its exceptional performance and innovative design. This model is engineered with a range of features and technologies that enhance efficiency and cleaning power, making it a popular choice for homeowners looking to upgrade their kitchen appliances.

One of the standout features of the KUDD03DT is its powerful cleaning system, which utilizes a multi-dimensional wash system to ensure that every dish, regardless of size or shape, comes out sparkling clean. The dishwasher is equipped with rotating wash arms that provide thorough coverage, directing water to every corner of the interior. This feature is especially beneficial for larger pots and pans, which often require more meticulous attention during the washing process.

Energy efficiency is another significant characteristic of the KitchenAid KUDD03DT. It is designed to consume less water and energy than traditional dishwashers, making it an environmentally friendly option. The unit is ENERGY STAR certified, providing reassurance that it meets stringent energy efficiency standards. Homeowners can save on utility bills while also contributing to a sustainable lifestyle.

The KUDD03DT also boasts a spacious interior, with adjustable racks and multiple loading options. This flexibility allows users to customize the interior space to fit their specific needs, accommodating everything from delicate glassware to heavy cookware. The upper rack features a dedicated stemware holder, which securely supports wine glasses and prevents them from tipping over during the wash cycle.

In terms of technology, the KUDD03DT includes a soil sensor that detects the level of dirtiness of the dishes and adjusts the wash cycle accordingly. This smart technology ensures optimal cleaning while conserving water and energy. Additionally, the dishwasher features a quiet operation, with sound-dampening materials that minimize noise, helping to maintain a peaceful home environment even during wash cycles.

Overall, the KitchenAid KUDD03DT combines practicality and sophistication. With its robust cleaning capabilities, energy-efficient design, and thoughtful features, it is an excellent investment for any kitchen. Whether entertaining guests or managing everyday meals, this dishwasher excels in performance, reliability, and user-friendliness, making it a top choice for discerning homeowners.