KitchenAid 8573157 Install the door handle on some models, Install door panel

Page 11

Install the door handle (on some models)

IMPORTANT: Do not scratch the front panel during this procedure.

1.Remove the door handle and hardware bag containing the setscrews and Allen wrench from the cardboard box.

2.Start set screws in handle.

3.Place handle on mounting studs with the set screws facing down.

4.Push the door handle tightly against the door. Insert the short end of the Allen wrench into the setscrews. Tighten the setscrews 1/4 turn past snug. Retain Allen wrench with Installation Instructions.

mounting stud

handle

setscrew (in bottom of handle)

Allen wrench

Pro Line® Series

1.Remove the Pro Line® Series handle and two screws from handle package.

2.Make sure plastic spacers are still attached to the door.

3.Attach the handle to the factory-supplied full front panel as shown.

plastic spacers

5.Gently set panel aside.

NOTE: Some models have 4 screws per side.

screws

 

inner

 

screws

door

do not remove screw.

 

panel

6.Lay the factory-supplied full front panel face down on a protective non-scratching surface.

7.Place the inner panel on the back of the full front panel as shown and attach, using the four #10-16 x 3/8" screws in the literature package.

4 screws

full front panel

inner door panel

top of panel

8.Attach the factory-supplied full front panel, inner panel, and handle assembly to the door.

9.Reinstall the two uppermost screws into the inner panel, do not tighten completely. This will hold the full front panel in place on the door frame.

2 screws

Install door panel

NOTE: Features on your dishwasher may differ from model shown.

For top vented models with a factory-supplied stainless or painted full front panel:

(Pro Line® series)

top vent

10.Install the two #8-18 x 1-3/8" screws from the literature package in the top corners of the door.

11.Align the top edge of the full front panel with the top edge of the console and secure corner screws.

12.Tighten the two screws installed in Step 9.

13.Reinstall and tighten the remaining screws in the inner panel.

1.Remove the carton containing the factory-supplied full front panel.

2.Remove the handle package from the front of the shipping base.

3.Remove the inner panel from the door.

4.With a TORX® screwdriver, remove three screws from both sides of the door. Hold the inner panel up while removing the screws.

2 screws

align top edges

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation Instructions Undercounter Dishwasher You need to Dishwasher SafetyTable of Contents Tools and Parts Installation RequirementsAll installations Addition, for new installationsCutout dimensions Product dimensionsWater Supply Requirements If direct wiring dishwasherIf connecting dishwasher with a power supply cord Drain RequirementsOption 1 Waste disposer with air gap Installation InstructionsPrepare cabinet opening using existing utility hookups Install the drain hoseOption 4 No waste disposer no air gap Option1 Direct wire methodElectrical connection Option 2 No waste disposer with air gapOption 2 Power supply cord method Install the water linePrepare dishwasher If you have built-up floors Install door panel Install the door handle on some modelsOption 2 Dishwasher side attachment Choose attachment optionCheck door spring tension Option 1 Countertop attachmentLevel the dishwasher Option 1 Direct wire methodMake Electrical Connection Move dishwasher into cabinet openingConnect to water supply Secure dishwasher in cabinet opening Connect to drainComplete installation Bottom sound pad installation on some modelsIf dishwasher does not operate Check operationPage Tenir compte de ceci Sécurité du lave-vaisselleTable des matières Outillage et pièces Exigences d’installationEmplacement d’installation Pour toutes les configurations d’installationDimensions de l’espace d’installation Dimensions du produitPour le raccordement direct du lave-vaisselle Spécifications de la canalisation d’évacuationSpécifications de l’alimentation en eau Spécifications électriquesOption 1 broyeur à déchets avec brise-siphon Instructions d’installationInstallation du tuyau d’évacuation Option 3 broyeur à déchets sans brise-siphon Raccordement électriqueOption 2 pas de broyeur à déchets avec brise-siphon Option 4 pas de broyeur à déchets sans brise-siphonOption 2 raccordement par cordon d’alimentation Installation de la canalisation d’eauPréparation du lave-vaisselle Plancher rehaussé Option Installation de la poignée de porteInstallation du panneau de la porte Option Fixation sur le plan de travail Choix de la méthode d’immobilisation de l’appareilContrôle de la tension des ressorts de la porte Option 1 Câblage direct Insertion du lave-vaisselle dans l’espace d’installationRaccordement électrique Établissement de l’aplomb du lave-vaisselleRaccordement à la canalisation d’eau Raccordement à la canalisation d’évacuation Alimentation de l’appareil par câblage direct Installation du panneau d’insonorisationDernières opérations de l’installation Si le lave-vaisselle ne fonctionne pas correctement Contrôle du fonctionnementPage Imprimé aux É.-U

8573157 specifications

The KitchenAid 8573157 is a versatile and highly regarded appliance designed to elevate your culinary experience. This model is part of KitchenAid's robust lineup of kitchen tools, specifically engineered to tackle a variety of cooking tasks with ease and efficiency.

One of the standout features of the KitchenAid 8573157 is its impressive 5-quart mixing bowl, crafted from stainless steel for enhanced durability. This generous capacity allows users to prepare large batches of dough, batter, or other mixtures, making it ideal for families or entertaining guests. The bowl also includes a convenient handle that ensures a secure grip while pouring or mixing.

The KitchenAid 8573157 is powered by a 300-watt motor, providing consistent and powerful performance. This motor enables the appliance to handle even the toughest mixing tasks, from kneading dense bread dough to whipping cream. With multiple speed settings, users can easily adjust the mixer's intensity according to their specific needs, ensuring optimal results every time.

Another notable aspect of this mixer is its planetary mixing action. This innovative technology allows the mixing attachment to move in a different direction than the bowl, ensuring thorough ingredient incorporation. As a result, users can achieve perfectly mixed ingredients without the need to stop and scrape down the sides of the bowl.

The KitchenAid 8573157 is also compatible with a wide range of attachments, making it a multifunctional kitchen tool. From pasta makers to food grinders, these attachments expand the appliance's capabilities, allowing users to explore various culinary techniques. This flexibility is particularly appealing to home chefs who appreciate the convenience of using one base machine for multiple functions.

In terms of design, the KitchenAid 8573157 showcases a classic aesthetic that fits seamlessly into any kitchen decor. Available in various colors, it allows users to choose a model that matches their personal style. Additionally, the sturdy construction ensures that this mixer is built to last, with many users reporting years of reliable performance.

Overall, the KitchenAid 8573157 stands out due to its robust features, advanced technologies, and user-friendly design, making it an essential tool for both novice cooks and experienced chefs. It not only simplifies the cooking process but also inspires culinary creativity, providing an enjoyable cooking experience for anyone who uses it.
Top Page Image Contents