KitchenAid 8573157 installation instructions Choose attachment option, Check door spring tension

Page 12

Choose attachment option

WARNING

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

Using two or more people, stand the dishwasher up.

5.Push bracket into slot on the side of dishwasher, and bend tab in towards the side of the dishwasher so that it keeps the bracket in place.

NOTE: Do not attach the dishwasher, this will be done later.

bend tabs

Option 1: Countertop attachment

The dishwasher must be secured to the cabinet. There are two brackets on top of the dishwasher that can be attached to the countertop if it is wood, laminate or other similar surfaces. If this is not possible, the brackets may be moved to the sides of the dishwasher.

brackets

front vent

model shown

Check door spring tension

1. With another person holding the dishwasher to prevent

 

it from tipping, open and close the door a few times. If

 

the door closes or falls open under its own weight, the

 

door tension will need to be adjusted.

2.

To adjust the door spring tension, unhook the spring

 

from the rear leg of dishwasher.

3.

With a 5/16" nut driver or hex socket, remove the screw

 

from the tensioner.

NOTE: Do not attach the dishwasher, this will be done later.

Option 2: Dishwasher side attachment

(for marble, granite or other hard surface countertop)

1.To remove the brackets from the top, flatten tab at back of brackets with pliers, and pull the brackets out of the slots.

tabs

2.Break off the end of the bracket along the scored line.

score line

3.Open dishwasher door and place towel over pump assembly and spray arm of dishwasher. This will prevent screws from falling into pump area when securing dishwasher to cabinet.

4.Push the plastic buttons out of the side of the tub.

NOTE: Save the buttons to cover the holes after dishwasher is installed.

plastic button

4.

The screw can be put into one of three holes ￿, ￿, ￿

 

in front leg of dishwasher. If the door closes by itself,

 

move the tensioner to a higher number hole and

 

replace screw. When door is unlatched, if it opens by

 

itself, move tensioner to a lower numbered hole and

 

replace screw.

5.

Re-attach door spring to rear leg. Tensioners on both

 

sides of dishwasher should be secured at same holes.

spring

tensioner

screw

￿ ￿ ￿

12

Image 12
Contents Installation Instructions Undercounter Dishwasher Dishwasher Safety Table of ContentsYou need to Installation Requirements All installationsAddition, for new installations Tools and PartsProduct dimensions Cutout dimensionsIf direct wiring dishwasher If connecting dishwasher with a power supply cordDrain Requirements Water Supply RequirementsInstallation Instructions Prepare cabinet opening using existing utility hookupsInstall the drain hose Option 1 Waste disposer with air gapOption1 Direct wire method Electrical connectionOption 2 No waste disposer with air gap Option 4 No waste disposer no air gapInstall the water line Option 2 Power supply cord methodPrepare dishwasher If you have built-up floors Install the door handle on some models Install door panelChoose attachment option Check door spring tensionOption 1 Countertop attachment Option 2 Dishwasher side attachmentOption 1 Direct wire method Make Electrical ConnectionMove dishwasher into cabinet opening Level the dishwasherConnect to water supply Connect to drain Secure dishwasher in cabinet openingBottom sound pad installation on some models Complete installationCheck operation If dishwasher does not operatePage Sécurité du lave-vaisselle Table des matièresTenir compte de ceci Exigences d’installation Emplacement d’installationPour toutes les configurations d’installation Outillage et piècesDimensions du produit Dimensions de l’espace d’installationSpécifications de la canalisation d’évacuation Spécifications de l’alimentation en eauSpécifications électriques Pour le raccordement direct du lave-vaisselleInstructions d’installation Installation du tuyau d’évacuationOption 1 broyeur à déchets avec brise-siphon Raccordement électrique Option 2 pas de broyeur à déchets avec brise-siphonOption 4 pas de broyeur à déchets sans brise-siphon Option 3 broyeur à déchets sans brise-siphonInstallation de la canalisation d’eau Option 2 raccordement par cordon d’alimentationPréparation du lave-vaisselle Plancher rehaussé Installation de la poignée de porte Installation du panneau de la porteOption Choix de la méthode d’immobilisation de l’appareil Contrôle de la tension des ressorts de la porteOption Fixation sur le plan de travail Insertion du lave-vaisselle dans l’espace d’installation Raccordement électriqueÉtablissement de l’aplomb du lave-vaisselle Option 1 Câblage directRaccordement à la canalisation d’eau Raccordement à la canalisation d’évacuation Installation du panneau d’insonorisation Dernières opérations de l’installationAlimentation de l’appareil par câblage direct Contrôle du fonctionnement Si le lave-vaisselle ne fonctionne pas correctementPage Imprimé aux É.-U

8573157 specifications

The KitchenAid 8573157 is a versatile and highly regarded appliance designed to elevate your culinary experience. This model is part of KitchenAid's robust lineup of kitchen tools, specifically engineered to tackle a variety of cooking tasks with ease and efficiency.

One of the standout features of the KitchenAid 8573157 is its impressive 5-quart mixing bowl, crafted from stainless steel for enhanced durability. This generous capacity allows users to prepare large batches of dough, batter, or other mixtures, making it ideal for families or entertaining guests. The bowl also includes a convenient handle that ensures a secure grip while pouring or mixing.

The KitchenAid 8573157 is powered by a 300-watt motor, providing consistent and powerful performance. This motor enables the appliance to handle even the toughest mixing tasks, from kneading dense bread dough to whipping cream. With multiple speed settings, users can easily adjust the mixer's intensity according to their specific needs, ensuring optimal results every time.

Another notable aspect of this mixer is its planetary mixing action. This innovative technology allows the mixing attachment to move in a different direction than the bowl, ensuring thorough ingredient incorporation. As a result, users can achieve perfectly mixed ingredients without the need to stop and scrape down the sides of the bowl.

The KitchenAid 8573157 is also compatible with a wide range of attachments, making it a multifunctional kitchen tool. From pasta makers to food grinders, these attachments expand the appliance's capabilities, allowing users to explore various culinary techniques. This flexibility is particularly appealing to home chefs who appreciate the convenience of using one base machine for multiple functions.

In terms of design, the KitchenAid 8573157 showcases a classic aesthetic that fits seamlessly into any kitchen decor. Available in various colors, it allows users to choose a model that matches their personal style. Additionally, the sturdy construction ensures that this mixer is built to last, with many users reporting years of reliable performance.

Overall, the KitchenAid 8573157 stands out due to its robust features, advanced technologies, and user-friendly design, making it an essential tool for both novice cooks and experienced chefs. It not only simplifies the cooking process but also inspires culinary creativity, providing an enjoyable cooking experience for anyone who uses it.