KitchenAid 8573157 Drain Requirements, Water Supply Requirements, Electrical Requirements

Page 5

Drain Requirements

Use the new drain hose supplied with your dishwasher. If this is not long enough, use a new drain hose with a maximum length of 12 feet (3.7 m) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher.

Connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

air gap

Use an air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above subfloor or floor.

Use 1/2" minimum I.D. drain line fittings.

Water Supply Requirements

A hot water line with 20-120 psi (138-862 kPa) water pressure.

120°F (49°C) water at dishwasher.

3/8" O.D. copper tubing with compression fitting or flexible stainless steel braided fill line (1/2" minimum plastic tubing is not recommended).

A 90° elbow with 3/8" N.P.T. external pipe threads on one end.

Do not solder within 6" (15.2 cm) from water inlet valve.

Electrical Requirements

Contact a qualified electrician.

Assure that the electrical installation is adequate and in conformance with all national and local codes and ordinances.

You must have:

120-volt, 60 Hz, AC-only, 15 or 20 amp., fused electrical supply.

Copper wire only.

We recommend:

A time-delay fuse or circuit breaker.

A separate circuit.

If direct wiring dishwasher:

Use flexible, armored or non-metallic sheathed, copper wire with grounding wire that meets the wiring requirements for your home and local codes and ordinances.

Use strain relief method provided with house wiring junction box or install a U.L.-listed/CSA-certified clamp connector to the house wiring junction box. If using conduit, use a U.L.-listed/CSA-certified conduit connector.

If connecting dishwasher with a power supply cord:

Use Power Supply Cord Kit (Part No. 4317824) marked for use with dishwashers. Kit contents include:

Volex, Inc., UL listed 16 gauge 3 wire power supply cord with 3 prong grounded plug.

Neer C-500 7/8 inch strain relief.

3 wire connectors.

Part No. 302797 grommet

Follow the kit instructions for installing the power supply cord.

Power supply cord must plug into a mating three prong, grounded outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

5

Image 5
Contents Installation Instructions Undercounter Dishwasher You need to Dishwasher SafetyTable of Contents All installations Installation RequirementsAddition, for new installations Tools and PartsCutout dimensions Product dimensionsIf connecting dishwasher with a power supply cord If direct wiring dishwasherDrain Requirements Water Supply RequirementsPrepare cabinet opening using existing utility hookups Installation InstructionsInstall the drain hose Option 1 Waste disposer with air gapElectrical connection Option1 Direct wire methodOption 2 No waste disposer with air gap Option 4 No waste disposer no air gapOption 2 Power supply cord method Install the water linePrepare dishwasher If you have built-up floors Install door panel Install the door handle on some modelsCheck door spring tension Choose attachment optionOption 1 Countertop attachment Option 2 Dishwasher side attachmentMake Electrical Connection Option 1 Direct wire methodMove dishwasher into cabinet opening Level the dishwasherConnect to water supply Secure dishwasher in cabinet opening Connect to drainComplete installation Bottom sound pad installation on some modelsIf dishwasher does not operate Check operationPage Tenir compte de ceci Sécurité du lave-vaisselleTable des matières Emplacement d’installation Exigences d’installationPour toutes les configurations d’installation Outillage et piècesDimensions de l’espace d’installation Dimensions du produitSpécifications de l’alimentation en eau Spécifications de la canalisation d’évacuationSpécifications électriques Pour le raccordement direct du lave-vaisselleOption 1 broyeur à déchets avec brise-siphon Instructions d’installationInstallation du tuyau d’évacuation Option 2 pas de broyeur à déchets avec brise-siphon Raccordement électriqueOption 4 pas de broyeur à déchets sans brise-siphon Option 3 broyeur à déchets sans brise-siphonOption 2 raccordement par cordon d’alimentation Installation de la canalisation d’eauPréparation du lave-vaisselle Plancher rehaussé Option Installation de la poignée de porteInstallation du panneau de la porte Option Fixation sur le plan de travail Choix de la méthode d’immobilisation de l’appareilContrôle de la tension des ressorts de la porte Raccordement électrique Insertion du lave-vaisselle dans l’espace d’installationÉtablissement de l’aplomb du lave-vaisselle Option 1 Câblage directRaccordement à la canalisation d’eau Raccordement à la canalisation d’évacuation Alimentation de l’appareil par câblage direct Installation du panneau d’insonorisationDernières opérations de l’installation Si le lave-vaisselle ne fonctionne pas correctement Contrôle du fonctionnementPage Imprimé aux É.-U

8573157 specifications

The KitchenAid 8573157 is a versatile and highly regarded appliance designed to elevate your culinary experience. This model is part of KitchenAid's robust lineup of kitchen tools, specifically engineered to tackle a variety of cooking tasks with ease and efficiency.

One of the standout features of the KitchenAid 8573157 is its impressive 5-quart mixing bowl, crafted from stainless steel for enhanced durability. This generous capacity allows users to prepare large batches of dough, batter, or other mixtures, making it ideal for families or entertaining guests. The bowl also includes a convenient handle that ensures a secure grip while pouring or mixing.

The KitchenAid 8573157 is powered by a 300-watt motor, providing consistent and powerful performance. This motor enables the appliance to handle even the toughest mixing tasks, from kneading dense bread dough to whipping cream. With multiple speed settings, users can easily adjust the mixer's intensity according to their specific needs, ensuring optimal results every time.

Another notable aspect of this mixer is its planetary mixing action. This innovative technology allows the mixing attachment to move in a different direction than the bowl, ensuring thorough ingredient incorporation. As a result, users can achieve perfectly mixed ingredients without the need to stop and scrape down the sides of the bowl.

The KitchenAid 8573157 is also compatible with a wide range of attachments, making it a multifunctional kitchen tool. From pasta makers to food grinders, these attachments expand the appliance's capabilities, allowing users to explore various culinary techniques. This flexibility is particularly appealing to home chefs who appreciate the convenience of using one base machine for multiple functions.

In terms of design, the KitchenAid 8573157 showcases a classic aesthetic that fits seamlessly into any kitchen decor. Available in various colors, it allows users to choose a model that matches their personal style. Additionally, the sturdy construction ensures that this mixer is built to last, with many users reporting years of reliable performance.

Overall, the KitchenAid 8573157 stands out due to its robust features, advanced technologies, and user-friendly design, making it an essential tool for both novice cooks and experienced chefs. It not only simplifies the cooking process but also inspires culinary creativity, providing an enjoyable cooking experience for anyone who uses it.