OPERATING the blender
Using the Blender_
Befor_e Use
While the Blender Power indicator light or the PULSE mode indicator light is blinking:
-Do not interfere with blade movement.
-Do not remove pitcher lid.
Before operating the Blender, make sure the pitcher is properly locked onto the Blender base.
1 | Put ingredients in pitcher and firmly |
place lid. |
The Blender has five speeds: STIR, CHOP, MIX, PUREE, and LIQUIFY. It also features CRUSH ICE and PULSE modes.
2 | Press POWER. The Power indicator |
light will flash when ready. Then press |
desired speed button for continuous operation at that speed. The white indicator light by the selected speed will stay lit. You may change settings without stopping by pressing a new speed button.
3 | When finished, press POWER to turn |
off. Unplug Blender before removing the |
pitcher.
NOTE: The Blender will operate only when pressing the POWER button (Power LED will flash) before selecting the desired speed.
IMPORTANT: If blending hot foods or liquids, do not fill to the top of the pitcher, and operate only on STIR speed. Remove center cap and place towel over lid.
8