Assembling Your Immersion Blender
Operating Your Immersion Blender
1.Before using the KitchenAid® Immersion Blender for the first time, wipe the motor body and attachment adapters with a clean, damp cloth to remove any dirt or dust. Mild dish soap may be used, but do not use abrasive cleansers.
NOTE: Do not immerse the motor body or the adapters in water.
Dry with a soft cloth. Wash all the attachments and accessories by hand or in the top rack of the dishwasher. Dry thoroughly.
NOTE: Always be sure to unplug the power cord from the wall socket before attaching or removing attachments.
2.Install attachments by aligning the motor body with either the blending attachment or an attachment adapter (Models 4KHB200 and 4KHB300 only). Insert the blending attachment or attachment adapter into the motor body until it locks with a click.
3.Remove the attachments by pressing both ejector buttons on either side of the body.
Using the Blending Attachment
1.Insert the blending attachment into the motor body.
2. | Plug the electrical cord into an |
| electrical wall socket. |
3. | Adjust the speed by turning the |
| speed control dial on top of the |
| Immersion Blender. |
4. | Insert the Immersion Blender into |
5.Press the power button to activate the Immersion Blender.
6.When blending is complete, release the power button before removing Immersion Blender from the mixture.
7.Unplug immediately after use, before removing or changing attachments.
4. Read Operating Tips (page 11).
Blending
Attachment
Chopper Adapter
Whisk Adapter
the mixture. |
NOTE: Immersion Blender should only be immersed in liquids the length of the attachment. Do not submerge beyond the seam of the blending attachment. Do not immerse the motor body into liquids or other mixtures.
6 | 7 |