Using Your Stand Mixer
Know Your Stand Mixer
1. | Make sure mixer is turned to OFF and unplugged. |
2. | Tilt mixer head back by pressing down on the mixer head locking |
| lever. Lift until head locks into up position. |
3. | Place mixing bowl into base and turn clockwise to lock into place. |
4. | Attach beater, whisk or dough hook by pressing up into beater |
Hub
Cover
(Removes for inserting accessories)
Rubber Plug for Locking Screw
Mixer
Head
| shaft as far as it will go. Turn counterclockwise, hooking pin into |
| grooves on beater shaft. |
5. | Press mixer head locking lever down and lower mixer head until |
| it locks into place. |
6. | Plug cord into electrical outlet. Select desired speed. Prepare |
| recipe according to instructions. |
7. | When finished, turn speed control dial to OFF. Unplug stand |
| mixer from outlet. |
8. | Press mixer head locking lever down to raise mixer head. Remove |
| beater, whisk or dough hook. Grasp bowl, turn counterclockwise, |
| and lift straight up to remove. |
Mixer
Bowl
Beater
Shaft
Mixer
Head
Locking
Lever
Speed
Control
Dial
Wire
WhiskFlatDough
Beater
Hook
4 | 5 |