Attaching the Plates

FG_SwivelBakerManual 7/17/07 10:33 PM Page 9

figure 4	1	Ensure that your SwivelBaker™ is
		unplugged and has completely cooled
		prior to attaching plates.
	2	The bottom plate is the plate that has the
		handle. On the opposite side of the handle
		is a protruding nub. Line the nub up with
		the hole located in the back of the bottom
		housing (see figure 4). Push in while
		pressing the handle down until it snaps
	3	into place.
		into place.
		The top plate also has a nub on the plate
figure 5		The top plate also has a nub on the plate
figure 5		that must be placed into the opening of
		that must be placed into the opening of
		the top plate housing (see figure 5). Slide
		the top plate locking lever up, then press
		the top plate into place. While holding the
		top plate, release the locking lever and
		ensure that it has slid into the groove of
		the top SwivelBaker™ plate (see figure 6.).


figure 6

Using Your SwivelBaker™

1Close the SwivelBaker™ and plug into a 120 volt outlet. The Red Power Light will go on, indicating that the SwivelBaker™ has power and is ready to begin preheating. The red power light will remain on until you unplug the unit.

2Press the On/Off button to begin the preheating process.

The LC display will illuminate and you will notice three blinking

bars indicating that your SwivelBaker™ is preheating. In approximately 4 - 5 minutes the Green Ready Light will illuminate and you will hear 4 short beeps

3Before the first waffle of the day, use a pastry brush to lightly coat the top and bottom waffle grids with vegetable oil or melted shortening. Cooking spray will also work well for this purpose.

4Ladle just enough batter to fill the lower waffle plate so that the peak areas of the plate are covered (about 1 cup). If necessary, use a spatula to spread the batter into the corners of grid.

5Press the Color button to the desired time setting from 2:30 (lightest) to 5:00 (darkest). If you desire a crispier waffle, press the Crisp button and you will notice a blue light illuminate under the Crisp button.

6Close the baker and push the retractable handle in. Rotate the SwivelBaker™ 180° clockwise and pull the retractable handle back out. Within 30 seconds the timer will start and the Green Ready Light will go out.

7When the selected time is up, you will hear 3 beeps and the Green Ready Light will illuminate. To remove the waffle, rotate the unit 180° counter - clockwise and lift the handle straight up.

8Using an oven mitt or pot holder, remove the bottom plate from the SwivelBaker™ housing by lifting straight up and away from the housing. Use caution as the plate is extremely hot.

WARNING: The SwivelBaker™ plate handle and plate will be hot.

Use a pot holder, or oven mitt before attempting to remove the bottom plate. After removing the waffle from the bottom plate, place the waffle plate back into the housing. Do not place the waffle plate on a counter, or any other surface to avoid damage resulting from the hot plate.

9Replace the bottom plate back into the housing. If you would like to make additional waffles, begin from Step 2 of this section.

10When you are finished baking, simply press the On/Off button and unplug from the wall outlet; the Red Power Light will go off.

11After your SwivelBaker™ has completely cooled, the waffle plates should be cleaned according to the section “Care & Cleaning” of this manual.

WPWB0010 specifications

Wolfgang Puck is a name synonymous with culinary excellence, and the WPWB0010 is an embodiment of his commitment to quality and innovation in the kitchen. This professional-grade kitchen appliance is designed for both amateur cooks and culinary enthusiasts, bringing superior performance and versatility to home cooking.

One of the standout features of the WPWB0010 is its powerful motor, which provides robust performance for a wide range of cooking tasks. Whether you’re blending, chopping, or pureeing ingredients, the WPWB0010 ensures efficient operation, making it a valuable tool for meal preparation. The motor is built to last, combining durability with high performance, which is especially crucial for frequent use.

The design of the WPWB0010 is both stylish and functional. Its sleek profile fits seamlessly into any kitchen decor, while ergonomic handles ensure a comfortable grip during use. The appliance is lightweight yet sturdy, allowing for easy handling and storage. An added advantage is its compact size, which makes it an excellent choice for kitchens with limited counter space.

The WPWB0010 incorporates various technologies to enhance its performance. It features multiple speed settings, allowing users to adjust the power based on the specific needs of the dish being prepared. This flexibility is especially handy when switching from whipping cream to chopping vegetables. Additionally, the built-in safety features, such as automatic shut-off and secure locking mechanisms, provide peace of mind during operation.

Another significant characteristic of this appliance is its ease of cleaning. The WPWB0010 is designed with removable parts that are dishwasher-safe, simplifying the post-cooking cleanup process. This user-friendly feature is essential for anyone who values convenience in their kitchen routine.

Moreover, the Wolfgang Puck WPWB0010 is designed with versatility in mind. The appliance comes with various attachments, including mixing bowls and blending accessories, giving users the ability to explore a range of culinary techniques. This makes it an ideal companion for experimenting with different recipes, from soups and sauces to smoothies and batters.

In conclusion, the Wolfgang Puck WPWB0010 stands out as a reliable, versatile, and stylish kitchen appliance. With its powerful motor, multiple speed settings, ergonomic design, and convenience features, it meets the needs of diverse cooking styles, making it a worthy investment for anyone looking to elevate their culinary experience.