SOMETHING WRONG?
Before calling a Service Engineer, please check through the following lists.
THERE MAY BE NOTHING WRONG.
Problem | Check |
|
|
Nothing works. | (a) Check |
| If you find :- |
| Display is blank. |
| Then it is likely that there is no electricity supply to your oven. |
| Check: (i) That the main cooker wall switch is turned on. |
| (ii) Check other appliances to see if you have a power |
| cut. |
| (iii) Check the main circuit breaker for the property. |
|
|
Display shows 0.00 AUTO. | The power supply to your oven has possibly been interrupted, but has |
| now come back on again. Reset the timer to the correct time of day and |
| "Manual" operation using instructions given in the timer section of the |
| book. |
|
|
Main & Top Ovens do not work, but | Check the following to ensure that the timer is in Manual Mode: |
the Grill works. | Check that the Auto Symbol is not lit up and is not flashing. |
| |
| See timer section for instructions on how to return timer to |
| "Manual". |
|
|
Top Ovens and Grill do not work, | Operating the cooker under the following conditions may cause a safety |
but the Main Oven works. | device to operate. |
| (a) Grilling with the door closed - always grill with the door open to the |
| correct position - see grilling. |
| (b) Grilling for an excessively long period at maximum setting - see |
| grilling guide. |
| (c) Grilling with inadequate ventilation in the cabinet - see installation |
| instructions. |
|
|
Grill does not work. | Check that you have selected :- "Grill" function on the "Top/Oven Grill |
| Select" knob (B) and a Grill setting on the "Grill" knob (A) - see grilling |
| page. |
|
|
Grill keeps turning on and off. | When the "Grill" control (A) is operating at less than "6", the grill will cycle |
| on and off, this is normal and is not a fault. |
|
|
Can not set an “Auto Cook” pro- | Remember: "Cook Period" is the actual length of time for which, the |
gramme | timer will switch the oven(s) on as part of an "Auto Cooking" programme. |
|
|
Draught from beneath control | A gentle flow of air will be blown from beneath the control panel when |
panel. | the appliance is used. If the appliance is still warm, this cooling fan may |
| run on, or restart itself after all of the controls have been turned off. |
| The fan will stop once the appliance has been cooled. This is normal and |
| not a fault. |
|
|
Timer buzzer/bleeper operates | Buzzer/Bleeper should stop automatically after 2 minutes. If not, |
continually | press minute minder button to silence. |
|
|
If you have been through the above list and there is still a problem; You should identify your Service
Agent using the list on the back page and contact your Local Service Office.
35